Category Archives: Manufacturing

163 New Industrial Manufacturing Planned Industrial Project Reports – June 2021 Recap

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today the June 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 163 new projects in the Industrial Manufacturing sector.

The following are selected highlights on new Industrial Manufacturing industry construction news.

:: Industrial Manufacturing - By Project Type

Manufacturing/Production Facilities - 150 New Projects

Distribution and Industrial Warehouse - 76 New Projects

:: Industrial Manufacturing - By Project Scope/Activity

New Construction - 52 New Projects

Expansion - 56 New Projects

Renovations/Equipment Upgrades - 75 New Projects

Plant Closings - 6 New Projects

:: Industrial Manufacturing - By Project Location(Top 10 States)

California - 14
Ohio - 14
South Carolina- 10
Texas - 9
Virginia - 9
Indiana - 8
Michigan - 8
New York - 7
Pennsylvania - 7
Wisconsin - 7

:: Largest Planned Project

During the month of June, our research team identified 15 new Industrial Manufacturing facility construction projects with an estimated value of $100 million or more.

The largest project is owned by First Solar, who is planning to invest $680 million for the expansion of their manufacturing facility in LAKE TOWNSHIP, OH by 2 million sf. They are currently seeking approval for the project. Construction is expected to start in late 2021, with completion slated for 2023.

:: Top 10 Tracked Industrial Manufacturing Projects

OHIO:
Biotechnology company is planning to invest $365 million for the construction of a 270,000 sf processing facility in NEW ALBANY, OH. Construction is expected to start in Fall 2021.

MISSOURI:
Semiconductor products mfr. is planning to invest $210 million for the expansion and equipment upgrades on their manufacturing facility in O FALLON, MO. Completion is slated for late 2021.

QUEBEC:
Electric vehicle mfr. is planning to invest $185 million for the construction of a battery manufacturing facility in MIRABEL, QC. They have recently received approval for the project. Completion is slated for Fall 2022.

TEXAS:
Specialty molded-fiber products mfr. is planning to invest $150 million for the construction of a manufacturing facility in LUFKIN, TX. They have recently received approval for the project. Completion is slated for 2023

INDIANA:
Pharmaceutical glass container mfr. is planning to invest $145 million for the construction of a 370,000 sf office and manufacturing facility in FISHERS, IN. They have recently received approval for the project. Construction is expected to start in late 2021, with completion slated for 2023.

SOUTH CAROLINA:
Automotive mfr. is planning to invest $118 million for the expansion and equipment upgrades of their manufacturing facility in RIDGEVILLE, SC.

DELAWARE:
Pharmaceutical company is planning for the construction of a 1.74 million sf manufacturing complex at 1091 Industrial Dr. in MIDDLETOWN, DE. Construction is expected to start in 2022 and will occur in multiple phases. Completion is slated for 2024.

WASHINGTON:
Medical equipment mfr. is planning to invest $92 million for a 50,000 sf expansion and equipment upgrades on their manufacturing facility in SPOKANE, WA. Completion is slated for late 2024.

GEORGIA:
Fuel cell mfr. is planning to invest $84 million for the construction of a processing facility in KINGSLAND, GA. They have recently received approval for the project.

MICHIGAN:
Automotive components mfr. is planning to invest $51 million for the renovation and equipment upgrades on a 210,000 sf manufacturing facility at 1400 Rochester Rd. in TROY, MI. They have recently received approval for the project.

Since 1959, SalesLeads, based out of Jacksonville, FL has been providing Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials.

Each month, our team provides hundreds of industrial reports within a variety of industries, including:
* Industrial Manufacturing
* Plastics
* Food and Beverage
* Metals
* Power Generation
* Pulp Paper and Wood
* Oil and Gas
* Mining and Aggregates
* Chemical
* Research and Development
* Distribution and Supply Chain
* Pipelines
* Pharmaceutical
* Misc. Industrial Buildings
* Waste Water Treatment
* Data Centers

PRESS CONTACT:
Cherise Kennerley
cherise@roi-m.com
847-312-1367

SalesLeads announced today the June 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity.

Related link: https://www.salesleadsinc.com/

SimuTech Group Announces Territory Expansion Offering Ansys Software and Support to All of US and Canada

ROCHESTER, N.Y. /ScoopCloud/ -- SimuTech Group, an Ansys Elite Channel Partner, is excited to announce their sales territory expansion for Ansys simulation software in the entire United States and Canada. Ansys is the gold standard of multi-physics engineering simulation software. Their software enables product design and analysis in a virtual environment, allowing companies to improve time-to-market, lower development costs, and fulfill critical product promises.

Headquartered in Rochester, NY, SimuTech Group is a privately held, woman-owned business. Their mission is to offer partnership and engineering expertise, through Ansys simulation products, support, training, consulting, and physical testing services. As of June 2021, SimuTech Group is now able to bring their expertise and product knowledge of Ansys software to customers throughout the U.S. and Canada - now including California, Arizona, New Mexico, Oklahoma, Arkansas, Minnesota, North Dakota, and South Dakota.

"We have been striving to expand our sales territory, and into California in particular, for many years. We are eager to bring our top ranking Ansys SimuTech Support throughout the U.S. and Canada. SimuTech Group has experienced tremendous growth over the last five years and this expansion is another exciting step for us on our growth path. I am excited to see where our long-standing partnership with Ansys takes us in the years to come," says Rick James, CEO SimuTech Group.

SimuTech Group has maintained a long and successful history in California providing industry leading consulting and physical test services. Californian's can now depend on SimuTech Group for best-in-class Ansys software as well as associated support, training, consulting, and physical testing services.

"We are thrilled to announce our expansion into the entire United States, especially California where we see a lot of opportunity to help both established and Startup customers realize the positive business outcomes that come through simulation," said Brent Mattson, SimuTech Group's Vice President of Sales.

To learn more about how SimuTech Group can help your company solve your engineering challenges, visit https://simutechgroup.com/.

ABOUT SIMUTECH GROUP:

SimuTech Group has over 38 years of experience inspiring clients to push the boundaries of innovation and deliver transformational products. SimuTech Group is the trusted advisor to over 3,000 clients who helps Ansys clients gain insight to improve product efficiency, reliability, and performance through a full-service approach from sales to support. Their team of engineering experts can help your problem-solve your Ansys challenges and move your projects forward. For more information on simulation offerings and capabilities please contact SimuTech Group.

MEDIA ONLY CONTACT
Morgan Reddy
Marketing Manager, SimuTech Group
585-666-3730
marketing@simutechgroup.com

SOCIAL LINKS:

LinkedIn: https://www.linkedin.com/company/simutech-group/

Twitter: https://twitter.com/SimuTechGroup

Facebook: https://www.facebook.com/SimuTechGroup/

MULTIMEDIA:

VIDEO (YouTube): https://youtu.be/qgv3OAIDtow

SimuTech Group, an Ansys Elite Channel Partner, is excited to announce their sales territory expansion for Ansys simulation software in the entire United States and Canada. Ansys is the gold standard of multi-physics engineering simulation software.

Related link: https://simutechgroup.com/

SIERA.AI Accelerates Momentum with Industry-Leading Forklift Safety with 16 New Enterprise Customer Wins in First Half of 2021

AUSTIN, Texas /ScoopCloud/ -- SIERA.AI, a leading innovator of safety solutions for preventing powered industrial truck accidents, today announced the continued surge in growth adding 16 new enterprise customers to its growing base of manufacturing, distribution and warehouse companies. The new customer wins represent a consecutive 100% revenue growth quarter over quarter within the industrial sector including agricultural equipment, industrial supplies & equipment, computer products & technologies, beauty products, global logistics & supply chain, lift truck distributor and automobile battery manufacturing to name a few.

The momentum comes with the May 2021 release of S3 Slow to a Safe Stop for Sit-Down forklift trucks, Safety Day June 8, 2021 and SIERA.AI as a finalist for 'Best New Product' announced prior to ProMat 2021 in May. "SIERA.AI continues to be at the leading-edge for what's next in lift truck safety," said Saurav Agarwal, president and CEO of SIERA.AI. "With our AI, Industrial IoT and sensors, we're transforming safety with zero pedestrian accidents, equipment accidents and infrastructure damages while achieving management's goal of digitizing safety."

New customers selected from our portfolio of AI machine learning safety solutions; the S2 Digital Inspection with Impact Monitoring, S3 Pedestrian Detection and S3 Slow to a Safe Stop. The SIERA.AI safety solutions support the customers' goal for digital transformation and a zero-accident workplace. All information collected from our safety solutions are stored in the web-based Dashboard central repository, empowering management with critical insights into safety, asset utilization, productivity and workflow optimization to name a few.

About SIERA.AI

SIERA.AI believes that Efficiency x Safety Accelerates Productivity. Our goal is to remove one productivity barrier at a time with innovative solutions that empower and safeguard company assets and protect their employees so they can focus on what they do best. We accomplish this by integrating technologies such as cloud, machine vision, IoT sensors and AI to digitize compliance and prevent accidents before they even happen.

For more information visit https://www.siera.ai/.

MEDIA CONTACT FOR SIERA.AI
Cherise Kennerley
cherise@siera.ai
847-312-1367 mobile

SIERA.AI, a leading innovator of safety solutions for preventing powered industrial truck accidents, today announced the continued surge in growth adding 16 new enterprise customers to its growing base of manufacturing, distribution and warehouse companies.

Related link: https://www.siera.ai/

Talon International Adjustec Division is Awarded Second US Patent: US 11,034,130 B2 for its Bandroll Technology

WOODLAND HILLS, Calif. /ScoopCloud/ -- The US Patent and Trademark Office (USPTO) recently awarded Talon's Adjustec a second patent in a series of patterns concerning their Adjustec stretch technology Bandroll product. The patent provides additional protection for the Adjustec Bandroll-the design behind Talon's Inventor of the Year Award for 2020, awarded by Aramark. Following this second patent are two more patterns pending for the Adjustec Bandroll that cover even a wider range of applications.

The Adjustec stretch technology has brought fashion to a new level of comfort and performance with their innovative stretch technology, using fusibles with any material. The Bandroll offers a stretch-fit solution for garments--particularly dress pant waistbands--providing a comfortable and durable fit that lasts a lifetime. Aramark the workwear Giant has adopted it as well in their quest to ensure they lead in providing performance in the workwear field.

Talon International has already been awarded three dress shirt design patents amongst 17 other granted patents for various product developments. Talon patents have been welcomed and adopted by several name brand clothing companies, including-but not limited to-Dockers, Uniqlo, Ralph Lauren, Round Tree and York, Murano, Van Heusen, Calvin Klein, Tommy Hilfiger, and Aramark workwear.

"We believe in innovation and technology, and we use patents to protect our intellectual property," says Larry Dyne, CEO of Talon International. "The modern production reality in the textile market is that anyone that tries to make these updated waistbands or collars without our approval, or a license from us, would, in fact, be infringing our patterns and pending patents."

Alongside creative design patterns, Talon's Adjustec division patents provide companies everywhere the opportunity to revolutionize the way they make fashion. With constant innovation in the fashion world, the Adjustec Bandroll provides the level of performance desired by buyers everywhere without sacrificing design and style.

"We believe that all modern pants...needs our technology to be competitive...Companies will also need our patented manufacturing systems and equipment to enjoy the incredible efficiencies and savings they provide," says Herman Roup, President and Inventor of Adjustec.

Since their revolutionary zipper invention in 1893, and over 128yrs of doing it right, Talon International remains committed to pushing boundaries with advanced, state-of-the-art design solutions, including trims, zippers, packaging, stretch technologies, and sustainable solutions. Talon is the solution for integrating invaluable, flexible, and sustainable products in the clothing we rely on every day. At Talon, Every. Detail. Matters.

For more information about the recently patented Adjustec Bandroll, see our website at https://taloninternational.com/product/bandroll/ or please contact Herman Roup by phone at 805-689-4656 or by email at HRoup@TalonTekfit.com.

*IMAGE link for media: https://www.Send2Press.com/300dpi/21-0708s2p-adjustec-300dpi.jpg

The US Patent and Trademark Office (USPTO) recently awarded Talon's Adjustec a second patent in a series of patterns concerning their Adjustec stretch technology Bandroll product. The patent provides additional protection for the Adjustec Bandroll-the design behind Talon's Inventor of the Year Award for 2020, awarded by Aramark. Following this second patent are two more patterns pending for the Adjustec Bandroll that cover even a wider range of applications.

Related link: https://taloninternational.com/

ViewTech Borescopes Exhibiting at AISTech June 29 – July 1 at Booth 2647

TRAVERSE CITY, Mich. /ScoopCloud/ -- ViewTech Borescopes will exhibit for the fifth time at the annual Association for Iron & Steel Technology Conference and Exposition. AISTech 2021 will be taking place June 29 through July 1 and is located at the Music City Center in Nashville, Tennessee. This year's leading iron and steel industry event will feature iron and steelmaking technologies from across the globe, hundreds of technical presentations, and more than 325 exhibitors.

ViewTech has been able to network with a multitude of iron and steel professionals, including engineers, quality managers, and chief inspectors, after first displaying their inspection video borescopes at AISTech 2016. Since last attending AISTech in 2019, ViewTech Borescopes has released several new inspection video borescopes and will have them on display for attendees to trial. This year ViewTech will have the following VJ-3 video borescope models available at AISTech 2021 booth #2647: the VJ-3 2.8mm, VJ-3 Dual Camera, VJ-3 Far Focus, and VJ-3 Ultraviolet.

Sales Consultant, Chris Courtright, will be representing ViewTech at AISTech 2021 and available to discuss inspection needs, along with arranging a no-cost, no-obligation demo to be shipped to your facility. With many of ViewTech's clientele based in ironmaking, steelmaking, finishing processes, and equipment technologies, their borescope experts are consistently informed that the VJ-3 video borescope outperforms previous visual inspection tools. By providing the best borescope option for their client's budget, ViewTech's VJ-3 video borescopes have been saving time and money on preventative maintenance and quality control inspections.

VJ-3 Video Borescope

The VJ-3 mechanical articulating video borescope is a nondestructive visual testing instrument used for the remote visual inspection of machinery, equipment, and components. The VJ-3 facilitates the visual recording and photo documentation of an inspection and components in areas that are otherwise inaccessible or require great effort and expense to access directly. The VJ-3 consists of two modules integrated into one system: an insertion tube with distally mounted camera/LEDs, and the base unit with control panel, LCD monitor, power source and all necessary circuitry.

About ViewTech Borescopes

ViewTech Borescopes, founded as RF System Lab in 2008, is North America's #1 seller of video borescopes. Their first product, the VJ borescope, set a new standard for portability, ergonomics and ease-of-use, with its industry-first mechanical, joystick-controlled articulation.

Learn more: https://www.viewtech.com

*IMAGE link for media: https://www.Send2Press.com/300dpi/21-0618s2p-vtech-300dpi.jpg

ViewTech Borescopes will exhibit for the fifth time at the annual Association for Iron & Steel Technology Conference and Exposition. AISTech 2021 will be taking place June 29 through July 1 and is located at the Music City Center in Nashville, Tennessee.

Related link: https://www.ViewTech.com

Propel Introduces Product 360, Enables True Enterprise Collaboration

SANTA CLARA, Calif. /ScoopCloud/ -- Propel, developer of the only unified quality management (QMS) and product lifecycle management (PLM) solution built on Salesforce, has introduced Product 360, a pure cloud approach to address lingering deficiencies of traditional PLM tools.

"With Product 360, we are announcing that old PLM has had its day. For more than two decades, it's failed to deliver on its promise of enterprise product collaboration," says Ray Hein, co-founder and CEO, Propel. "Manufacturers need technology to help them collaborate broadly and pivot quickly. Legacy PLM, which is primarily deployed on premise and confined to engineering, just doesn't cut it anymore."

Built on the world's most trusted business cloud platform, Propel enables manufacturers to fully engage their entire value chain across the product lifecycle. In doing so, PLM finally delivers meaningful collaboration between customers, suppliers, R&D (product, engineering, manufacturing, quality), and go-to-market (sales, service, marketing) teams. With Propel, a single platform equips the enterprise with the data, insight, and context needed to create winning products efficiently, commercialize them successfully, and correct issues decisively.

The result: manufacturing companies deliver better products faster, win more business, and grow margins. Propel customers include major consumer brands like Roku and Vizio; large enterprises like Zoetis and Masco; and newly public companies like Inari Medical, Eargo, and Desktop Metal.

Benefits delivered by Propel include:

* ncreased engineer-to-order throughput by 500%

* Reduced time to market by 30%

* Improved product margins by up to 50%

* Reduced month-end reporting duration from 5 days to 5 minutes

* Reduced warranty costs by 30%

Propel also delivers:

* Deployments which are up to 70% faster than those of traditional on-premise PLM

* Total flexibility with a range of low code/no code extensibility options, whereas legacy PLM solutions require code development for customization

* An intuitive and highly-productive user experience

* A customer satisfaction score of 100% for nine months running

From a platform perspective, it's clear that the cloud is a strategic imperative for product development. According to CIMdata's 2021 Cloud-SaaS Adoption in PLM report, 28% of industrial respondents have already moved to cloud PLM while 66% of those using on-premise PLM are considering such a move.

Per Michael Farr, VP Operations, MSA Safety. "For our business, going to the cloud was a no-brainer. And among the cloud PLM options, Propel was the clear choice for us. Compared to other systems we've used, it has a much more intuitive user experience, it's faster to deploy, and it inherits the power of the Salesforce platform. The return on investment with Propel was nearly instantaneous. Processes which used to take months now take days."

Product 360 is available now. In addition, Propel continues its aggressive innovation with three major releases per year.

The Spring 2021 release is also available and features the following highlights:

* Greater productivity and reduced overhead through streamlined management of Office 365 documents

* Enhanced employee proficiency and compliance with new training capabilities

* Improved security and protection for sensitive data when collaborating with external partners through new sharing rules

* Reduced IT complexity through more efficient integration of disparate enterprise systems with the Propel Enterprise Integration Framework (EIF) and release-based APIs

To learn more about Propel's vision for Product 360, visit https://www.propelplm.com/.

About Propel

Propel enables Product 360, the modern way to take products from concept to customer. Born in the cloud and built on Salesforce, Propel helps manufacturers collaborate across the entire value chain to get the right products to market faster and at a higher margin. Companies of all types trust Propel to achieve product success, from hyper-growth startups like Desktop Metal, Imperative Care, and Inari Medical, to established innovators like Roku, Simplisafe, and Vizio, to Fortune 500 companies like Shell and Zoetis. For more information, visit propelplm.com and follow us on LinkedIn.

For more information, contact: Samantha Chapman (samantha@chapmancommunicationsgroup.com)

*LOGO link for media: https://www.Send2Press.com/300dpi/21-0617s2p-propel-logo-300dpi.jpg

Propel, developer of the only unified quality management (QMS) and product lifecycle management (PLM) solution built on Salesforce, has introduced Product 360, a pure cloud approach to address lingering deficiencies of traditional PLM tools.

Related link: https://www.propelplm.com/

Aramark Awards 2020 Innovator Award to Talon’s Adjustec Stretch and Performance for their patented performance BandRoll and manufacturing systems

WOODLAND HILLS, Calif. /ScoopCloud/ -- Aramark, one of the world's largest food service, facilities, and uniform providers, has awarded its 2020 Innovator Award to Talon International's Adjustec Stretch & Performance Technology Division. This division of the legendary Zipper company and Trims manufacturer is making non-stretch fabric stretch and recover, even replacing elastics, while helping wearers to be more comfortable, fabrics to last longer, and to improve the fit of the garments.

Adjustec holds over 12 patents on their stretch and performance innovations plus patented equipment systems, there are also several more pending patent issuance. Learn more at https://taloninternational.com/adjustec/ .

"This award from Aramark, a Fortune 500 company, is a great honor for our team to collaborate and work with such amazing partners," said Larry Dyne, CEO of Talon International. "The Adjustec team, also known to the market as Tekfit, works hard to constantly innovate our proprietary stretch technology, creating the technology that keep us all comfortable, dry, and cool. For a uniform supply company, like Aramark, this allows them to provide the most comfortable work clothes in the world."

The business with Aramark is a new vertical in workwear for Adjustec. The Adjustec Division of Talon International (r) has numerous innovations that ultimately create a more comfortable experience for millions of wearers. Its patented stretch technologies can be found in over 200million garments.

Talon's commitment goes way beyond simply creating great products. Everything we do helps to make sewing factories more efficient and reduce waste by utilizing our patented technical systems. Protecting the environment is as high a priority as innovating new products.

"Adjustec creates Innovative Solutions that impacts the wearers and the environment," said Herman Roup, President and Innovator of the Adjustec Division. "Protecting our shared world is a huge part of our mission. Many of our innovations can be applied to many manufacturers to reduce waste, clean up the oceans, and still deliver cutting edge innovations that consumers have come to expect and demand, luckily for us, we found Aramark who is equally committed to these goals."

Talon invented the world's first zipper in 1893, changing fashion forever. With a pedigree like this, it may seem like they would rest on their laurels. Instead, they're committed to moving fashion forward with custom zippers, trim, tags, patented stretch technologies and a wide variety of printed marketing solutions including a new technology for anti-counterfeit and consumer engagement. Talon is your innovative and creative partner pushing the envelope to bring forth new fashion technologies to the apparel industry while understanding the importance of quality, brand DNA, and speed to market.

Learn more: https://taloninternational.com/

*PHOTO: https://www.Send2Press.com/300dpi/21-0617s2p-herman-awardr-300dpi.jpg

*Caption: Herman Roup, President of Adjustec, Holding the Aramark 2020 Innovator Award.

Aramark, one of the world's largest food service, facilities, and uniform providers, has awarded its 2020 Innovator Award to Talon International's Adjustec Stretch & Performance Technology Division. This division of the legendary Zipper company and Trims manufacturer is making non-stretch fabric stretch and recover, even replacing elastics, while helping wearers to be more comfortable, fabrics to last longer, and to improve the fit of the garments.

Related link: https://taloninternational.com/

Propel Appoints Charles Lawson as Chief Revenue Officer

SANTA CLARA, Calif. /ScoopCloud/ -- Propel, developer of the only unified quality management (QMS) and product lifecycle management (PLM) solution built on Salesforce, today announced the appointment of Charles Lawson as its Chief Revenue Officer (CRO). The newly created role will manage sales, professional services, and customer success through the company's next phase of growth.

"Charles is uniquely qualified to lead Propel through our next stage of growth thanks to his domain expertise and proven track record of scaling SaaS organizations," said Ray Hein, co-founder and CEO of Propel. "He understands our customers' needs and has a passion for solving manufacturing problems through innovative solutions."

Lawson brings more than 20 years of extensive experience building and managing teams for lead generation and sales in SaaS and enterprise software. He has worked with solutions in all three phases of the product lifecycle, including the "as designed," "as built" and "as maintained" stages.

Lawson joins Propel from Fulcrum, where he served as CRO. Prior to Fulcrum, Lawson spent almost 11 years at Egnyte in Mountain View, California as their Vice President of Sales. During his tenure at Egnyte, Lawson was part of the leadership team that increased Annual Recurring Revenue from $500,000 to over $100 million, while leading North America sales and growing the company's European presence. Additionally, he's held posts at ServiceMax, Arena Solutions and Datasweep.

Hein and Lawson have known each other for 20 years. Hein worked alongside Lawson's father, James Hugh Lawson, at Agile Software, where Hein led product strategy and created the company's product roadmap, while Lawson's father served as the company's first head of sales up to its initial public offering. Lawson, whose father passed away earlier this year, made the very personal decision to join Propel, alongside Hein, for the opportunity to mirror his father's trajectory as a sales leader building a next generation product solution.

"This is a proud and personal moment for me," said Lawson about joining Propel. "I see incredible growth potential and the same prospect for Propel in PLM and QMS that ServiceMax had in field service - a company built on the Salesforce platform in a space that has not seen any redefinition in multiple decades."

As CRO, Lawson will drive new customer acquisition and help current partners maximize the value derived from Propel's product success platform.

For more information, visit https://www.propelplm.com/.

About Propel

Propel enables Product 360, the modern way to take products from concept to customer. Born in the cloud and built on Salesforce, Propel helps manufacturers collaborate across the entire value chain to get the right products to market faster and at a higher margin. Companies of all sizes trust Propel to achieve product success, from hyper-growth startups like Desktop Metal, Imperative Care and Inari Medical, to established innovators like Roku, Simplisafe and Vizio, to Fortune 500 companies like HP, Shell and Zoetis. For more information, visit propelplm.com or follow us on LinkedIn.

For more information, contact:
Samantha Chapman (samantha@chapmancommunicationsgroup.com)

Propel, developer of the only unified quality management (QMS) and product lifecycle management (PLM) solution built on Salesforce, today announced the appointment of Charles Lawson as its Chief Revenue Officer (CRO). The newly created role will manage sales, professional services, and customer success through the company's next phase of growth.

Related link: https://www.propelplm.com/

Maglite and First Responders Children’s Foundation (FRCF) Partner to Promote Traffic and Pedestrian Safety

ONTARIO, Calif. /ScoopCloud/ -- Maglite and First Responders Children's Foundation (FRCF) are joining together to support traffic and pedestrian safety during the deadliest days of the year. According to the Pedestrian Safety Institute, July is the deadliest month of the year for traffic related fatalities including those of pedestrians. The days surrounding July 4th are particularly dangerous.

Darkness and low-visibility play a significant role in pedestrian deaths. In fact, more than 70 percent of fatalities happen at night or at dusk or dawn hours. Maglite and First Responders Children's Foundation are on a mission to illuminate the dangers of driving in low-visibility conditions to reduce deaths and injuries.

Maglite and First Responders Children's Foundation will be raising awareness by distributing press materials and alerting the media about the dangers pedestrians will face in the coming months, while also promoting National Roadside Traffic Safety Awareness Month.

National Roadside Traffic Safety Awareness Month was created by the Pedestrian Safety Institute to draw attention to this deadly time of year. Last year we saw one of the largest increases in vehicular fatalities, despite the significant decline in the number of miles Americans were driving as a result of the coronavirus pandemic.

The goal of this program is to increase awareness and urge people to use caution while driving during this particularly perilous time of year.

"There are simple ways to reduce the senseless number of deaths due to pedestrian traffic accidents and that is to carry a bright flashlight, wear reflective clothing and be cautious, especially around fast-moving traffic," said Tony Maglica, Founder and CEO of Mag Instrument, Inc., manufacturer of the Maglite® Flashlight.

More information about First Responders Children's Foundation is available at https://1strcf.org/. Follow First Responders Children's Foundation on Facebook, Twitter, and Instagram @1stRCF.

MEDIA CONTACT:
Joanna Black
Senior Director of Strategic Partnerships
joanna@1stRCF.org
(646) 912-2681

For more information on the MAGLITE® / 1stRCF collaboration visit: https://maglite.com/collections/first-responders-childrens-foundation

Follow @MAGLITE on Instagram, Facebook, YouTube and Twitter

MEDIA ONLY CONTACT:
Lou Desmond for Mag Instrument, Inc.
+1-951-258-6466
lou@dandlpr.com

Maglite and First Responders Children's Foundation (FRCF) are joining together to support traffic and pedestrian safety during the deadliest days of the year. According to the Pedestrian Safety Institute, July is the deadliest month of the year for traffic related fatalities including those of pedestrians. The days surrounding July 4th are particularly dangerous.

Related link: https://maglite.com/

Kalyagen and Uniwell Announce Partnership to Manufacture Proprietary and Third-Party Skin Care Products

FORT WORTH, Texas /ScoopCloud/ -- Kalyagen® and Uniwell Laboratories announced today that they have entered into a joint venture to produce the unique, patent-pending Juviqa Stem Cell Beauty System and expand Uniwell's manufacturing capabilities to include cosmetics.

"We are pleased to announce our expanded partnership with UniWell to produce the Juviqa skin care system," said Christian Drapeau, CEO and Chief Scientist of Kalyagen®. "This will help us further our mission to bring science-based cutting-edge stem cell products to consumers, this time targeted to provide anti-aging and regeneration to the body's largest, and most visible, organ - the skin."

Through its affiliate Biogen Stemceuticals, Inc., Kalyagen® has invested in and installed at UniWell a unique production line that has been designed and calibrated to allow for the manufacture of skincare products using all-natural ingredients. Currently, most skincare products - even high-end ones and products claiming to be "natural"- are still using chemical emulsifiers and/or antimicrobials which can be harsh and tend to dry the skin.

"We've worked with Kalyagen for some time now manufacturing its STEMREGEN stem cell supplement," said Armando Fitz, VP of Sales of UniWell. "Through this partnership with Kalyagen, we now have the ability to manufacture the Juviqa stem cell beauty system and produce white label and private-branded cosmetic and skincare products and stem cell-based serums for our current and future clients."

"There is no skincare system anywhere like Juviqa," said Herbert Dogan, CMO of Kalyagen®. "It delivers visible, transformational results that, until now, have only been available through the use of needles and expensive treatments. It will truly create a paradigm shift in the skincare industry."

Five years in development, Juviqa is a seven-product, five-step skincare system that can be applied at home or in a spa. It is a unique and patent-pending blend of a) proprietary plant-based extracts documented to allow the body to release its own stem cells to repair and rejuvenate the skin, b) additional science-based nutrients documented to enhance the biological processes that ultimately diminish signs of aging, targeting smoothness, elasticity, firmness, and radiance, c) a unique microdermabrasion product that trigger the skin's inherent repair process, d) a novel breakthrough skin penetrant allowing the skin to absorb large regenerative molecules provided by the last crown jewel of the Juviqa system, e) a stem cell regenerative serum. Juviqa is available as a complete system, though several underlying components will be available separately. Kalyagen® and Biogen Stemceuticals are seeking cosmetic industry joint venture partners.

About Kalyagen

Kalyagen® was founded by Christian Drapeau, author of the bestseller Cracking the Stem Cell Code. Kalyagen® is a leader in the research and development of natural products aimed at supporting stem cell function of the body. Stem cells constitute the natural repair system of the body, and stem cell enhancers have been documented to strongly contribute to improving health and quality of life. Kalyagen is the majority owner of Biogen Stemceuticals, Inc., the developer and manufacturer of the Juviqa Stem Cell Beauty System. For more information, please visit: http://www.kalyagen.com/

About UniWell

UniWell Laboratories is a 178,000 sqf full-service cGMP manufacturing and packaging facility for nutraceuticals, OTC pharmaceuticals, and dietary supplements. UniWell is a premier custom formulator and complete turnkey solution provider for contract manufacturing & private label dietary supplements and nutraceuticals. Its OTC-Grade & FDA registered state-of-the-art facility allows for the development of innovative technologies & product solutions that are best-in-class. UniWell manufactures, produces, & packages industry-leading products that meet the highest standards for quality. It produces multiple categories of products from its GMP facility and offers expertise in development & fulfillment of numerous product types including: powders, liquids, capsules, tablets and gels. For more information, please visit: http://www.uniwelllabs.com/

CONTACT:
Biomics, LLC (dba Kalyagen®)
Herbert Dogan, Chief Marketing Officer (310-433-8072)
hgd@kalyagen.com

UniWell Laboratories
Armando Fitz, VP Sales (817-510-1850)
afitz@uniwelllabs.com

Social media: @kalyagen #stemthetideoftime #stemthetide #thestemregeneffect

Disclaimer: None of the statements contained in this press release have been evaluated by the U.S. Food and Drug Administration. The products and information in the release are not intended to diagnose, treat, cure or prevent any disease.

*PHOTO link for media: https://www.Send2Press.com/300dpi/21-0615s2p-uniwell-line-300dpi.jpg

*Caption: Skin care production line at Uniwell

Kalyagen® and Uniwell Laboratories announced today that they have entered into a joint venture to produce the unique, patent-pending Juviqa Stem Cell Beauty System and expand Uniwell's manufacturing capabilities to include cosmetics.

Related link: https://www.kalyagen.com/

171 New Industrial Manufacturing Planned Industrial Project Reports – May 2021 Recap

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today the May 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 171 new projects in the Industrial Manufacturing sector.

The following are selected highlights on new Industrial Manufacturing industry construction news.

Industrial Manufacturing - By Project Type

Manufacturing/Production Facilities - 154 New Projects

Distribution and Industrial Warehouse - 55 New Projects

Industrial Manufacturing - By Project Scope/Activity

New Construction - 44 New Projects

Expansion - 73 New Projects

Renovations/Equipment Upgrades - 72 New Projects

Plant Closings - 5 New Projects

Industrial Manufacturing - By Project Location(Top 10 States)
New York - 11
Ohio - 11
Texas - 10
Indiana - 9
Wisconsin - 9
California - 8
North Carolina - 8
Tennessee - 7
Pennsylvania - 7
Virginia - 7

Largest Planned Project

During the month of May, our research team identified 9 new Industrial Manufacturing facility construction projects with an estimated value of $100 million or more.

The largest project is owned by Intel Corporation, who is planning to invest $3.5 billion for the renovation and equipment upgrades on their manufacturing facility in RIO RANCHO, NM. Construction is expected to start in late 2021, with completion slated for late 2022.

Top 10 Tracked Industrial Manufacturing Projects

NEW YORK:

Biotechnology company is planning to invest $480 million for the expansion of their laboratory and processing facility in TARRYTOWN, NY by 207,000 sf. They are currently seeking approval for the project.

TEXAS:

Automotive components mfr. is considering investing $286 million for the construction of a manufacturing facility and currently seeking a site in CENTRAL TEXAS. Watch SalesLeads for updates.

LOUISIANA:

Wood products mfr. is planning to invest $157 million for the expansion and equipment upgrades of their manufacturing facility in HOLDEN, LA. They have recently received approval for the project.

NORTH CAROLINA:

Construction equipment mfr. is planning to invest $70 million for the expansion of their manufacturing facility in STATESVILLE, NC by 580,000 sf. They have recently received approval for the project. Construction is expected to start in Summer 2021.

SOUTH CAROLINA:

Firearm mfr. is planning to invest $62 million for the renovation and equipment upgrades on a recently acquired 310,000 sf manufacturing and distribution facility on Metropolitan Dr. in MIDLANDS, SC.

GEORGIA:

Paper products mfr. is planning to invest $60 million for the expansion of their manufacturing facility in JESUP, GA. They have recently received approval for the project.

KENTUCKY:

Automotive components mfr. is planning to invest $51 million for the expansion of their manufacturing facility in WILLIAMSBURG, KY by 68,000 sf. They have recently received approval for the project. Completion is slated for late 2022.

MICHIGAN:

Home appliance mfr. is considering investing $50 million for the construction of a new 150,000 sf manufacturing and technology center in or the renovation and equipment upgrades on their existing facility in ST. JOSEPH, MI. Watch SalesLeads for updates.

TEXAS:

Tube and pipe mfr. is planning to invest $30 million for the construction of an 80,000 sf manufacturing facility on US 290 in BRENHAM, TX. They have recently received approval for the project.

GEORGIA:

Wood products mfr. is planning to invest $30 million for an expansion of their manufacturing facility in PERRY, GA. They have recently received approval for the project.

Since 1959, SalesLeads, based out of Jacksonville, FL has been providing Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials. https://www.salesleadsinc.com/

MEDIA ONLY CONTACT

Cherise Kennerley

cherise@roi-m.com

847-312-1367 mobile (media only)

SalesLeads announced today the May 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 171 new projects in the Industrial Manufacturing sector.

Related link: https://www.salesleadsinc.com/

ViewTech Borescopes Rugged Visual Inspection Tools Adhere to Military-Grade Standards

TRAVERSE CITY, Mich. /ScoopCloud/ -- Since their VJ video borescope hit the market in 2008, ViewTech Borescopes mechanical articulating video borescopes have been widely used throughout a variety of inspection applications, including those that are considered explosive environments. When redesigning their 3rd generation inspection borescope, it was critical to have the newest borescope tested for MIL-STD-810G certification.

After ViewTech Borescopes VJ-3 was introduced to replace their previous video borescope model, the newest video borescope underwent rigorous military-standardized testing with National Technical Systems (NTS). NTS has been a partner to defense and naval contractors for more than 50 years and specializes in safety and testing standards. With the ViewTech borescope operated as designed, testing was completed by NTS without igniting the testing chamber, even when the risk of an explosion was present. The VJ-3 articulating video borescope has been designed to resist extreme conditions as noted with the MIL-STD-810G Explosive Environment Certificate.

ViewTech Borescopes recently added MIL-STD-810G details and guidance on their website for those searching for an inspection tool to safely use inside an explosive environment. Included in this enhancement is access to ViewTech Borescopes MIL-STD-810G test report.

VJ-3 Video Borescope

The VJ-3 mechanical articulating video borescope is a NDT instrument used for the RVI of machinery, equipment, and components. The VJ-3 facilitates the visual recording and photo documentation of inspection and components in areas that are otherwise inaccessible or require great effort and expense to access directly. The VJ-3 video borescope consists of two modules integrated into one system: an insertion tube with distally mounted camera/LEDs, and the base unit with a control panel, LCD monitor, power source, and all necessary circuitry.

About ViewTech Borescopes

ViewTech Borescopes, founded as RF System Lab in 2008, is North America's #1 seller of video borescopes. Their first product, the VJ borescope, set a new standard for portability, ergonomics, and ease-of-use, with its industry-first mechanical, joystick-controlled articulation.

For more information on VJ-3 Video Borescope: https://www.viewtech.com

MULTIMEDIA:

*VIDEO (YouTube): https://youtu.be/nMzKWtANhjQ

*PHOTO link for media: https://www.Send2Press.com/300dpi/21-0607s2p-vtb-inspection-tools-300dpi.jpg

MEDIA CONTACT:
For more information, press only:
Duncan White, Director of Sales and Marketing
231-943-1171
dwhite@viewtech.com

Since their VJ video borescope hit the market in 2008, ViewTech Borescopes mechanical articulating video borescopes have been widely used throughout a variety of inspection applications, including those that are considered explosive environments. When redesigning their 3rd generation inspection borescope, it was critical to have the newest borescope tested for MIL-STD-810G certification.

Related link: https://www.ViewTech.com

Bridge Publications, Publisher of the Works of Scientology Founder L. Ron Hubbard, Wins Manufacturing Leadership Award

LOS ANGELES, Calif. /ScoopCloud/ — The Manufacturing Leadership Council of the National Association of Manufacturers presented Bridge Publications Inc., publisher of the nonfiction works of author and Scientology Founder L. Ron Hubbard, with their coveted ML100 Award at a Virtual Awards Gala to honor manufacturing excellence, announced the Church of Scientology International today.

Mr. Hubbard’s books and lectures of Dianetics and Scientology stand as the largest body of information ever assembled on the mind, spirit and life. And in a year where COVID-19 cut people off from friends, family and life as they knew it, Bridge Publications made it possible for Scientologists and thousands new to the religion to continue or embark on a journey of spiritual growth despite restrictions.

Manufacturing Leadership Council’s decision to present its awards gala remotely this year underscores the unique challenges the general public and manufacturers in particular faced from the COVID-19 pandemic. To recognize companies that submitted projects directly tied to pandemic recovery and response, the Council originated the “Creators Respond Honor Roll.” So, for 2021, not only did Bridge Publications Inc. win its 12th Manufacturing Leadership ML100 Award, the organization was also featured on the honor roll for its project: “Bridge Manufacturing-International Response.”

“With the start of the COVID-19 pandemic, most countries published restrictions that closed churches of all denominations,” says Camila Gonzales, Bridge Publications Director of Public Relations. “Fortunately, Bridge Publications and all Scientology Churches have an Extension Course program. We were an integral part of making it possible for thousands of Scientologists to progress through their studies despite stay-at-home orders. And many thousands more who were interested or curious and new to Scientology had the opportunity to learn and benefit from Mr. Hubbard’s wisdom in the comfort of their homes.”

The primary goal of the project Bridge submitted to the Manufacturing Leadership Council was to provide Extension Course study materials. Despite the pandemic, this made it possible for Scientologists to continue their spiritual progress through the study of Dianetics and Scientology books and lectures. It also enabled those interested in finding out about Scientology to do so despite government restrictions and regulations closing houses of worship, including Scientology Churches and Missions in many countries, for the better part of the year.

“As soon as the pandemic struck, our Churches reached out to Scientologists and encouraged them to take advantage of their time at home by studying Extension Courses,” says Gonzalez.

Bridge Publications contacted suppliers to arrange raw materials as orders for Extension Course packs began flooding in. Where Bridge would normally produce an average of 1,500 Extension Course Packs per month, this rapidly increased to 7,000 per month, with individuals from 69 countries requesting Extension Course packs in 17 languages.

Through their in-house digital printing and full binding facility, they shipped study materials to the homes of those ordering directly from Bridge and those placing orders through local Scientology Churches, Missions and groups. Bridge has a longstanding policy of shipping within 24 hours of any order, and despite the spike in demand, they managed to continue to fill Extension Course orders on time.

Those studying these courses report that progressing on Extension Courses helped them make it through the pandemic. They found themselves able to cope and thrive when everything else seemed to be shutting down.

“When I make my Extension Course a part of my daily and weekly life, everything starts to require a lot less effort,” wrote one Extension Course student. “It is like oxygen for me as a spiritual being,” wrote another. “I’m finding answers to questions I’ve had my whole life,” was another person’s feedback on the value of the Extension Course.

The second goal of “Bridge Manufacturing – International Response” was to help those living and working in their community, City of Commerce, California.

In response to the pandemic, the Church of Scientology compiled and produced educational booklets to help people understand the best practices for preventing the spread of COVID-19. The Church of Scientology International Dissemination and Distribution Center, also located in Commerce, produced more than 7.5 million copies of these booklets.

“This is our home,” says Gonzalez, “and it was very important to our staff to be able to help local residents and those working nearby make it through the pandemic safe and well.”

Throughout May and June 2020, Bridge staff went door-to-door in the neighborhood providing booklets to residents. They also placed boxes of booklets on the counters of 281 essential businesses, and police and fire departments, where customers or visitors were invited to take copies for themselves and their friends and families.

“All our staff members are very proud of winning this ML100 award and especially for our being included in the Manufacturing Leadership Creators Respond Honor Roll,” says Gonzalez.

Manufacturing Leadership Council is a division of the National Association of Manufacturers, which developed the Manufacturing Leadership Awards to honor manufacturing companies and leaders that are shaping the future of global manufacturing. Award winners are selected by a panel of expert judges.

Prior to the release of the Dianetics and Scientology Basics Books and Lectures in early 2007, under the direction of Scientology ecclesiastical leader Mr. David Miscavige, Bridge Publications was established in the world’s largest exclusively digital print house-a 276,000-square-foot facility stretching a full city block. All facilities, from administrative offices to manufacturing and distribution, are located under the same roof. The operation is dedicated to making L. Ron Hubbard’s works accessible everywhere.

For more information on Bridge Publications visit their website at https://www.bridgepub.com/ or watch Inside Scientology: Bridge Publications on the Scientology Network, available on DIRECTV Channel 320, https://www.scientology.tv/, on mobile apps and via the Roku, Amazon Fire and Apple TV platforms.

Media queries: mediarelations@churchofscientology.net

MULTIMEDIA:

*VIDEO (YouTube): https://youtu.be/Eae3ZomZAYE

*PHOTO 1: https://www.Send2Press.com/300dpi/21-0603s2p-cos-bridge-award-300dpi.jpg

Caption: ML100 trophy and plaque.

*PHOTO 2: https://www.Send2Press.com/300dpi/21-0603s2p-cos-bridgepub-300dpi.jpg

Caption: Gluing and folding station at Bridge Publications.

The Manufacturing Leadership Council of the National Association of Manufacturers presented Bridge Publications Inc., publisher of the nonfiction works of author and Scientology Founder L. Ron Hubbard, with their coveted ML100 Award at a Virtual Awards Gala to honor manufacturing excellence, announced the Church of Scientology International today.

Related link: https://www.scientology.org/

Bayflex Solutions to Demonstrate New Endurance Test Capabilities for Flexible Displays

SAN FRANCISCO, Calif. /ScoopCloud/ -- Bayflex Solutions, a systems integrator, and Yuasa System, the leading provider of endurance test systems for displays and flexible electronics, will demonstrate new solutions for flexible display testing at the Society for Information Display (SID) Display Week, taking place virtually May 17-21. Building on Yuasa's world-class capabilities for repeated physical motions using unique tension-free technology that enables non-destructive performance evaluations, Bayflex will demonstrate several new capabilities at the Display Week Exhibitor's Forum:

* CS-MAX Platform enables multi-layer delamination and material deformation testing of various sample or component sizes. The platform enables in-fold and out-fold, with optional cartridges, optional CS-CAM optical imaging package, and uses a high-power DR/5 motor for increased torque.

* SU short roll mechanical jig for sliding screen smartphone designs (e.g., rollable phones). The SU's standard counter-weight design enables precise adjustments for various spring type mechanisms, with an optional load-cell package to detect additional material sagging.

* LET low-energy impact tester for multi-purpose indentation assessments. A multi-actuator chassis enables simultaneous folding motion combined with variable low impact energy testing. Controlled adjustments in impact and with different materials and sizes, enables scratch (steel wool), soft indentation (human pushing), hard indentation (stylus simulation), and other impact assessments.

* Flexdata SaaS data platform optimized for Yuasa endurance testers, enabling remote monitoring and collaboration around sample testing. Flexdata enables easy set-up for repetitive or similar testing parameters, multi-level real-time data analysis, data storage in secure cloud environment, with two-way communication and data exchange capabilities. Compatible with passive component environment tests.

Google's Reliability Lab utilizes Bayflex/Yuasa equipment for display testing, noting: "Comprehensive and accurate reliability assessment of foldable displays has been always very challenging. Specifically assessing the right failure mode and failure time/cycle is very crucial for foldable display development."

The CS-Max and SU systems are compatible with Flexdata. Bayflex Solutions and Yuasa System are continuing to develop multi-environment chambers (PICO) that enable desktop endurance testing in multiple hostile conditions such as humidity and temperature.

Bayflex Solutions offers equipment on a subscription basis in addition to purchase, and has opened test centers in Japan and the U.S. so that clients can ship samples for testing.

About YUASA System Co.Ltd

Yuasa System has been developing endurance testing systems for over twenty-five years. Trusted in automobile, consumer electronics and other industries it has developed modular systems with tension-free(tm) mechanisms to better isolate test characteristics and conform to functionality tests according to the latest international, domestic and industry-led testing standards for flexible materials, components, cables and modules ( https://www.yuasa-system.jp/ ).

About Bayflex Solutions

Bayflex Solutions is a systems integrator of Yuasa System and developer of endurance testing system control, electronic & image processing and data analysis. Bayflex Solutions has been a long-term collaborator with leading North American companies and standards bodies to ensure leading-edge testing capabilities ( https://bayflextechnologies.com/ ).

Bayflex Solutions, a systems integrator, and Yuasa System, the leading provider of endurance test systems for displays and flexible electronics, will demonstrate new solutions for flexible display testing at the Society for Information Display (SID) Display Week, taking place virtually May 17-21.

Related link: https://www.bayflextechnologies.com/

After, Inc. publishes a ‘Risk Management 101’ guide that gives Warranty Leaders a first-hand look at this complex discipline

NORWALK, Conn. /ScoopCloud/ -- After, Inc. a pioneer in the Warranty Services industry, has provided innovative warranty marketing, analytics, and program management solutions to top-tier manufacturing clients since 2005. In delivering program management solutions, After, Inc. found that few manufacturers understand Risk Management - yet it can be one of the most impactful aspects of Warranty Programs. So, After, Inc. prepared this guide to share the basics of the discipline, as there is nothing like it available in the industry today.

After, Inc.'s EVP, Paul Swenson, a highly respected veteran in the Warranty Services industry, helped develop this guide. "A lot of manufacturers and retailers 'don't know what they don't know' about available warranty risk structures and the true costs of risk transfer," said Swenson.

"Frequently, risk oversight is outsourced to companies that use old-school actuarial methods which don't forecast claims or reserves accurately - nor provide the business intelligence needed to optimize and expand the warranty programs. This leads to untapped opportunities that they may never discover or, often worse, unwarranted rate increases that have negative impacts on their programs and the ability to deliver a great customer experience. This guide is designed to give Warranty leaders and their teams a much-needed introduction to the basic concepts of Risk Management - and the impact that inaccurate claims forecasts can have on their profitability."

This "Risk Management 101" guide covers:

* Section 1 - the key components and definitions in Risk Management.

* Section 2 - types of risk structures and the pros/cons of each.

* Section 3 - how to accurately estimate losses and how errors can impact program profits.

* Section 4 - a case study on how After helped Polaris - a long-time client - develop a risk roadmap that led from a completely outsourced risk management structure to creating its own warranty company.

About After, Inc.

After, Inc. ( http://www.afterinc.com/ ) is a pioneer in the warranty business - providing product registration, marketing, analytics, and program administration to warranty organizations across a wide range of industries. Founded in 2005, After has over 15 years of experience delivering innovative warranty offerings to manufacturing clients. After, Inc. partners with some of the world's top brands to help transform their warranty businesses, driving customer satisfaction post-purchase, higher product reliability, deeper brand equity and additional revenue/profit opportunities. Headquartered in Norwalk, Connecticut, and with offices in New York City, After, Inc. is part of the EPIC Insurance Group, an innovative retail property and casualty and employee benefits insurance brokerage and consulting firm with 3,600 employees across the United States.

MEDIA CONTACT
Danielle Grusso
203-254-5302
dgrusso@afterinc.com

After, Inc. a pioneer in the Warranty Services industry, has provided innovative warranty marketing, analytics, and program management solutions to top-tier manufacturing clients since 2005. In delivering program management solutions, After, Inc. found that few manufacturers understand Risk Management.

Related link: http://afterinc.com/

SIERA.AI Expands S3 Slow to a Safe Stop Product Offering to Include Sit-Down Forklift Trucks

AUSTIN, Texas /ScoopCloud/ -- SIERA.AI, a leading innovator for safety solutions for preventing forklift accidents, announced today the expansion of the SIERA.AI Safety Solution S3 Slow to a Safe Stop to include sit-down forklift trucks.

The announcement completes the S3 rollout for electric lift trucks including but not limited to stand-up's, center-rider pallet trucks, narrow aisle, tuggers, order pickers and reach trucks. The S3 Safety System integrates machine vision, IoT sensors and AI to prevent forklift accidents in warehouses, manufacturing facilities and distribution centers.

SIERA.AI offers two S3 Safety System solutions to prevent pedestrian injuries, and reduce facility and product damage:

S3 Proximity Warning & Impact Monitoring constantly monitors proximity around gas, electric or LP lift trucks. If a pedestrian or object comes within its path, the lift truck will automatically sound an audio alarm and give visual cues to the operator in enough time to prevent the accident.

S3 with Slow to a Safe Stop now offered on sit-down lift trucks, constantly monitors around the lift truck. If a pedestrian or object gets too close and the driver is unaware, the S3 with Slow to a Safe Stop will automatically override the driver, slow down the vehicle and enable safe stopping.

As the announcement is publicly released, SIERA.AI has received new customer orders for the sit-down forklift S3 Safety System.

"Our customers are implementing both S3 Safety Systems on their lift trucks," said Suhas Ahuja, COO of SIERA.AI. "The S3 Proximity Warning & Impact Monitoring is typically installed on most of the electric lift truck fleet with S3 with Slow to a Safe Stop on targeted electric lift trucks where high-risk areas have been identified. The combination provides advanced protection with data collection on a real-time Dashboard for a deeper understanding of movements and behaviors."

About SIERA.AI

SIERA.AI believes Efficiency x Safety Accelerates Productivity with innovative solutions that empower and safeguard company assets and protect their employees so they can focus on what they do best. We accomplish this by integrating technologies such as machine vision, IoT sensors and AI to prevent accidents before they even happen.

For more information visit: http://www.siera.ai

MEDIA CONTACT
Cherise Kennerley
cherise@siera.ai

SIERA.AI, a leading innovator for safety solutions for preventing forklift accidents, announced today the expansion of the SIERA.AI Safety Solution S3 Slow to a Safe Stop to include sit-down forklift trucks.

Related link: https://www.siera.ai/

Industrial Projects Ending Week of 5/8/2021

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today new capital industrial projects in (New Mexico, North Carolina, and Michigan). New identified projects in the industrial sector may consist of new construction, expansion, relocation or closing.

Industrial projects for week of May 8, 2021 include:

NEW MEXICO

Intel Corporation is expanding and planning to invest $3.5 billion for the manufacturing of advanced semiconductor packaging technologies at their plant in Rio Rancho, New Mexico. Construction is expected to start in late 2021, with completion slated for late 2022.

Identified Capital Equipment to be Purchased:

Air Emissions Control Equipment, Building Renovation, Compressed Air Systems, Control Systems and Instrumentation, Conveyors, Cranes and Hoists, Fire Protection Equipment, Heat Exchangers, HVAC Equipment, Lift Trucks, Lighting, Loading Dock Equipment, Manufacturing Equipment, Material Handling/Storage Equipment, Mechanical Construction, Networking/Security Equipment, Packaging Equipment

INTEL CORPORATION

www.intel.com

1600 Rio Rancho Drive South, Rio Rancho, NM 87124

Key Project Contacts can be obtained at www.salesleadsinc.com

NORTH CAROLINA

Doosan Bobcat North America is planning to invest $70 million for the expansion of their manufacturing facility in Statesville, North Carolina. Construction is expected to begin in July 2021. The expansion will meet the growing demand for all Doosan Bobcat products, including their Doosan Portable Power equipment and the growing line of Bobcat grounds maintenance and landscaping industry.

Identified Capital Equipment to be Purchased:

Air Emissions Control Equipment, Compressed Air Systems, Control Systems and Instrumentation, Conveyors, Cranes and Hoists, Fire Protection Equipment, Floor Coatings, Heat Exchangers, HVAC Equipment, Lift Trucks, Lighting, Loading Dock Equipment, Manufacturing Equipment, Material Handling/Storage Equipment, Mechanical Construction, Networking/Security Equipment, Packaging Equipment

DOOSAN BOBCAT NORTH AMERICA

www.bobcat.com

1293 Glenway Drive, Statesville, NC 28625

Key Project Contacts can be obtained at www.salesleadsinc.com

MICHIGAN

Mayville Engineering Company, Inc. is considering expanding their production capacity and currently seeking 250,000 sf of manufacturing space in the area of Detroit, Michigan.

Identified Capital Equipment to be Purchased:

Air Emissions Control Equipment, Building Construction, Compressed Air Systems, Control Systems and Instrumentation, Conveyors, Cranes and Hoists, EPC, Fire Protection Equipment, Floor Coatings, Heat Exchangers, HVAC Equipment, Lift Trucks, Lighting, Loading Dock Equipment, Manufacturing Equipment, Material Handling/Storage Equipment, Mechanical Construction, Networking/Security Equipment, Packaging Equipment

MAYVILLE ENGINEERING COMPANY, INC.

www.mecinc.com

715 South Street, Mayville, WI 53050

Key Project Contacts can be obtained at www.salesleadsinc.com

Industrial Capital Project Activity - Week Ending 5/8/2021

North Carolina - 6

Florida - 4

Virginia - 3

Washington - 3

Wisconsin - 3

About SalesLeads, Inc

Since 1959, SalesLeads, based out of Jacksonville, FL provides Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials. http://www.salesleadsinc..com/.

MEDIA CONTACT
Cherise Kennerley
cherise@roi-m.com
847-312-1367 mobile

SalesLeads announced today new capital industrial projects in (New Mexico, North Carolina, and Michigan). New identified projects in the industrial sector may consist of new construction, expansion, relocation or closing.

Related link: https://www.salesleadsinc.com/

151 New Industrial Manufacturing Planned Industrial Project Reports – April 2021 Recap

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today the April 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 151 new projects in the Industrial Manufacturing sector.

The following are selected highlights on new Industrial Manufacturing industry construction news.

INDUSTRIAL MANUFACTURING - BY PROJECT TYPE

Manufacturing/Production Facilities - 134 New Projects

Distribution and Industrial Warehouse - 77 New Projects

INDUSTRIAL MANUFACTURING - BY PROJECT SCOPE/ACTIVITY

New Construction - 58 New Projects

Expansion - 47 New Projects

Renovations/Equipment Upgrades - 65 New Projects

Plant Closings - 3 New Projects

INDUSTRIAL MANUFACTURING - BY PROJECT LOCATION(TOP 10 STATES)

North Carolina - 13
Ontario - 9
Ohio - 9
Pennsylvania - 8
New York - 7
Tennessee - 6
Texas - 6
Michigan - 6
Indiana - 6
Wisconsin - 6

LARGEST PLANNED PROJECT

During the month of April, our research team identified 9 new Industrial Manufacturing facility construction projects with an estimated value of $100 million or more.

The largest project is owned by General Motors, who is planning to invest $2.3 billion for the construction of an EV battery manufacturing facility adjacent to their existing plant in SPRING HILL, TN. Completion is slated for late 2023.

TOP 10 TRACKED INDUSTRIAL MANUFACTURING PROJECTS

ONTARIO:
Pharmaceutical company is planning to invest $925 million for the construction of a processing facility in TORONTO, ON. They are currently seeking approval for the project.

TENNESSEE:
Specialty pharmaceutical products mfr. is planning to invest $220 million for the construction of a manufacturing facility in ORLINDA, TN. They have recently received approval for the project.

NORTH CAROLINA:
Biotechnology company is planning to invest $213 million for the renovation and equipment upgrades on a 117,000 sf processing facility in SANFORD, NC. They have recently received approval for the project.

ALABAMA:
Building materials mfr. is planning to invest $79 million for an expansion and equipment upgrades at their manufacturing facility in PRATTVILLE, AL. They have recently received approval for the project.

INDIANA:
Plastic packaging products mfr. is planning to invest $70 million for the expansion, renovation, and equipment upgrades at their various manufacturing facilities in INDIANA. They have recently received approval for the project.

MISSOURI:
Construction material mfr. is planning to invest $62 million for the construction of a 455,000 sf manufacturing facility in SIKESTON, MO. They have recently received approval for the project. Construction is expected to start in Summer 2021.

KENTUCKY:
HVAC equipment mfr. is planning to invest $60 million for the construction of a 380,000 sf manufacturing facility on Buck Creek Rd. in SIMPSONVILLE, KY. They are currently seeking approval for the project. Completion is slated for 2023.

VIRGINIA:
Auto components mfr. is planning to invest $39 million for the construction of a manufacturing facility at Progress Park in WYTHEVILLE, VA. They have recently received approval for the project.

NORTH CAROLINA:
Fermentation, filtration, and processing equipment mfr. is planning to invest $38 million for the construction of a 135,000 sf manufacturing facility in HICKORY, NC. They have recently received approval for the project.

OHIO:
Plastic recycling company is planning to invest $22 million for a 54,000 sf expansion, renovation, and equipment upgrades on their manufacturing facility in CLYDE, OH. Completion is slated for Summer 2022.

ABOUT SALESLEADS INC.
Since 1959, SalesLeads, based out of Jacksonville, FL provides Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials. https://www.salesleadsinc.com

SalesLeads announced today the April 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects.

Related link: https://www.salesleadsinc.com/

Record-Setting Video Borescope Unit Sales Begin Second Quarter 2021

TRAVERSE CITY, Mich. /ScoopCloud/ -- With thousands of ViewTech Borescopes clients relying on a VJ-3 video borescope for routine inspections and maintenance, word-of-mouth referrals contributed to ViewTech's record unit volume sales during April business. Two of the newest users who were both advised by ViewTech clients and added a VJ-3 video borescope to their inspection processes are an American professional stock car racing association and an electrical equipment and solutions company.

When an engineer at a high-performance engine design and manufacturing corporation purchased a VJ-3 video borescope and expressed their satisfaction with the research and development team at a professional racing association, they also made a call to ViewTech. Once their R&D team trialed a VJ-3 3.9mm x 1.5 meter, it was easy to determine the video borescope would help their efficiency and effectiveness as they continuously strive to design safer and more competitive stock cars.

After an executive at a custom steel fabrication company witnessed the quality of borescope used by one of their clients, they recommended they connect with ViewTech Borescopes for a no-cost demo of the VJ-3 6.0mm x 3.0 meters Dual Camera. With finished tube weldments requiring visual inspection, the lead engineer at an electrical equipment and solutions company agreed to test the VJ-3 Dual Camera at their facility.

The outcome when completing a visual weld inspection with the VJ-3 Dual Camera was a drastic improvement from what they had been experiencing with their previous inspection tool. Featuring both a forward-facing and 90-degree camera that can view with the press of a button, along with capturing superior images and videos, the verdict to purchase a new video borescope from ViewTech Borescopes was effortless.

VJ-3 Video Borescope

The VJ-3 mechanical articulating video borescope is a NDT instrument used for the RVI of machinery, equipment, and components. The VJ-3 facilitates the visual recording and photo documentation of inspection and components in areas that are otherwise inaccessible or require great effort and expense to access directly. The VJ-3 video borescope consists of two modules integrated into one system: an insertion tube with distally mounted camera/LEDs, and the base unit with a control panel, LCD monitor, power source, and all necessary circuitry.

About ViewTech Borescopes

ViewTech Borescopes, founded as RF System Lab in 2008, is North America's #1 seller of video borescopes. Their first product, the VJ borescope, set a new standard for portability, ergonomics, and ease-of-use, with its industry-first mechanical, joystick-controlled articulation.

For more information on VJ-3 Video Borescope: https://www.viewtech.com

MULTIMEDIA:

*VIDEO (YouTube): https://youtu.be/nMzKWtANhjQ

*PHOTO link for media: https://www.Send2Press.com/300dpi/21-0507s2p-vtech-300dpi.jpg

Media Contact:
For more information, press only:
Duncan White, Director of Sales and Marketing
231-943-1171
dwhite@viewtech.com

With thousands of ViewTech Borescopes clients relying on a VJ-3 video borescope for routine inspections and maintenance, word-of-mouth referrals contributed to ViewTech's record unit volume sales during April business.

Related link: https://www.ViewTech.com

Ken Rakusin Grows Gordon Brush Mfg. Co. Inc. Into Major US Manufacturer of Industrial Brushes

CITY OF INDUSTRY, Calif. /ScoopCloud/ -- In 1990, Ken Rakusin took the position of president at Gordon Brush Manufacturing Company, but he was not sure what he was getting himself into. The company was based out of a dark and rundown 15,000 square foot facility.

"We had 22 employees. I mean, this was a little, tiny company that was on the verge of going out of business, and every year, for the next six years, I was able to double the company's profits," Rakusin said.

Thirty-one years later, Rakusin said there are 200 employees in a 182,000 square foot facility making more than 17,000 types of brushes for many industries, including medical, aerospace, janitorial and military.

Rakusin remains committed to keeping jobs in the City of Industry, despite an increasing number of manufacturers going overseas for cheaper labor.

"I could put a lot of money in my pocket if I outsourced everything and I went to China or Mexico," he said. "But I also have this loyalty to my employees. We have people that have been here more than 35 years. Our plant manager used to be the janitor."

However, one challenge of staying put in the U.S. is finding workers who have the skills or the desire to work a blue-collar job.

"Nobody that works in a factory that when they were going through school said, 'Gee, I want to make brushes for a living,'" Rakusin said. "It doesn't happen."

It is an issue that Joanna McClaskey, the executive director of the Industry Business Council, is looking at as part of the Made in City of Industry initiative.

The goal is to keep existing manufacturers, which provide about 17,000 local jobs, or 25% of total employment, and attract new ones to the city.

"There are so many people that college is not their first choice of what they should do in their life," Rakusin said. "They might want to work with their hands. They have this great mechanical mind, or they have this great mind where they love to see machines work and operate and design machines."

He ultimately wants to see more education in the U.S. geared toward those who work best with their hands, preparing them for blue-collar jobs critical to the economy.

VIDEO: https://youtu.be/udkrO3R9uNA

Company information: https://www.gordonbrush.com/

*PHOTO link for media: https://www.Send2Press.com/300dpi/21-0506s2p-Ken-Rakusin-300dpi.jpg

In 1990, Ken Rakusin took the position of president at Gordon Brush Manufacturing Company, but he was not sure what he was getting himself into. The company was based out of a dark and rundown 15,000 square foot facility.

Related link: https://www.gordonbrush.com/

RYPOS Welcomes Paul Anderson as President and General Manager

FRANKLIN, Mass. /ScoopCloud/ -- Rypos, a CARB verified manufacturer of active diesel particulate filters, is pleased to announce and welcome Paul Anderson in the newly created role of President/General Manager. In his new position, Paul will be responsible for all operational aspects of the business and for execution of the Company's growth plans. Building on his long experience in the industrial equipment market, he will be working closely with the Company's customers and suppliers to ensure all needs are met in a seamless and timely manner.

Paul's 30-year career started in the air compressor division at Ingersoll Rand, where he worked in aftermarket applications. Over the last two decades, he has held increasing responsible roles at Lincoln Holdings, SKF and most recently Cleaver Brooks where he was responsible for their aftermarket group and their China operations. Peter Bransfield, CEO of Rypos, states, "As the company has grown and applications for our active diesel particulate filters have expanded, we saw a strong fit for Paul to help the Company grow its core business while building capability for several new segments. His strong operating experience and performance will be essential for us to take the Company to the next level."

Paul commented, "I am excited to be a part of a world class company and look forward to working alongside Peter and the rest of the Rypos team to grow the business and the customer base for our proprietary Active DPF technology."

Rypos is a Massachusetts based company that manufactures a self-cleaning diesel particulate filter for transportation refrigeration, emergency standby generators, intermodal material handling equipment and coastal and harbor marine applications.

For more information about Rypos, please visit http://www.rypos.com/.

https://www.facebook.com/ryposactivefilters

https://www.linkedin.com/company/rypos

RYPOS, Inc., 40 Kenwood Circle, Franklin, MA 02038, Telephone 508-429-4552.

MEDIA CONTACT
Trish Jacobs
(508) 429-4552
tjacobs@rypos.com

*LOGO link for media: https://www.Send2Press.com/300dpi/21-0504s2p-rypos-logo-300dpi.jpg

Rypos, a CARB verified manufacturer of active diesel particulate filters, is pleased to announce and welcome Paul Anderson in the newly created role of President/General Manager. In his new position, Paul will be responsible for all operational aspects of the business and for execution of the Company's growth plans.

Related link: https://www.rypos.com/

Rural Iowa Manufacturing Jobs Surplus Means Big Opportunities

OSCEOLA, Iowa /ScoopCloud/ -- It's been a year since the manufacturing industry was hit by the COVID-19 crisis forcing businesses to get creative to manage their workforce assets. In April of 2020, the rural Clarke County, Iowa's unemployment rate jumped from 3.4% to 11.8%, and more than 100,000 workers across the state were displaced, laid off, or simply let go when businesses had to close their doors, says Clarke County Development Corporation (CCDC).

Now COVID restrictions have begun to lift and the economy is picking up again, especially for manufacturers in Osceola, Iowa. Unfortunately, many businesses are still struggling in their search for the right candidates to fill key positions.

"We've got 4,700 non-farm jobs and our major manufacturers continue to grow and add staff," said Bill Trickey, Executive Director of the Clarke County Development Corporation. "Now is a great time to find a job in Clarke County."

Major Clarke County employers have a variety of positions available and are casting a wide net to entice the right candidates to the region. Full of lucrative job opportunities, Osceola boasts easy access from Des Moines, Indianola, Norwalk, St. Mary's, Martensdale and many other South-Central Iowa and Northern Missouri cities via I-35 and highways 34 and 92.

"We're certainly in a position where we have more jobs than people to fill them, so we're recruiting from across the state to find the right fit," said Susan Miller, Human Resources Recruiter for the Altec body plant. "While our pay is more than competitive with most Des Moines metro employers, and our benefits package is outstanding, we've found that it's our unique company culture that really makes working here desirable."

In an effort to fill essential manufacturing positions, companies are finding new incentives to draw in applicants, encourage referrals from current employees, and reward retention among the staff. For example, The Paul Mueller Company, manufacturers of stainless steel, food-grade refrigeration and transportation tanks, offers an incremental referral bonus as well as new employee sign-on bonuses awarded at ninety days, six months, and one year.

Altec body plant helps employees attain Bachelor or Masters degrees in the industry by funding online courses through The University of Alabama and offers wellness benefits to employees and their spouses for completing fun and easy challenges. And Iowa Steel gives their regional sales team the opportunity to work from home or remotely as they travel the country to meet with customers, offering an excellent base salary as well as commission.

"We're in the process of growing, locally and nationwide. On top of filling regional sales positions around the country, we're also adding to our Osceola facility in the fall of 2021 and hiring more skilled labor," said Kate Patton, Human Resources Director at Iowa Steel. "Clarke County is full of employers offering diverse opportunities with competitive pay and an excellent work-life balance. We're just looking for the right applicants."

While unemployment rates are relatively low, there is still a lot of work available in rural Iowa, especially in Clarke County. Employers are finding that top pay and benefits aren't the only tools needed to draw in a workforce.

"Money isn't the most important thing people are looking for these days. People are looking at our culture, and finding a place they enjoy coming to every day, and positioning their family to do more than just make ends meet," said Lauren Robins, Human Resources Generalist II for Paul Mueller Company. "On-site training, and a safe and healthy work environment are all important to prospective employees. Most of all they want to know that they're valued and able to be productive and growing for years to come."

Clarke County's manufacturing industry has advantages not found in bigger cities across the state. Factors like job security, educational incentives, and unique, diverse opportunities for advancement are all part of what draws in a workforce that drives the success of the entire community.

For more information about the availability of jobs mentioned in this press release, feel free to reach to the Human Resources department at each company:

- Altec Osceola Body Plant, HR Recruiter, Susan Miller, 641-223-8807, email: susan.miller@altec.com

- Iowa Steel Human Resources Director, Kate Patton, 641-342-2134, email: kpatton@countrysidetank.com

- Paul Mueller Company, Lauren Robins, Human Resources Generalist II, 641-342-5521, email: lrobins@paulmueller.com.

If you'd like to learn more about the manufacturing industry and development opportunities available in Clarke County, Iowa, please reach out to Bill Trickey, Executive Director of the Clarke County Development Corporation, at 641-414-1884 or email: info@clarkedev.com.

It's been a year since the manufacturing industry was hit by the COVID-19 crisis forcing businesses to get creative to manage their workforce assets. In April of 2020, the rural Clarke County, Iowa's unemployment rate jumped from 3.4% to 11.8%, and more than 100,000 workers across the state were displaced, laid off, or simply let go when businesses had to close their doors, says Clarke County Development Corporation (CCDC).

Related link: https://osceolaclarkedev.com/

Mag Instrument, the USA manufacturer of the MAGLITE Flashlight, celebrates World Amateur Radio Day by joining forces with ARRL, the national association for Amateur Radio

ONTARIO, Calif. /ScoopCloud/ -- In celebration of World Amateur Radio Day on April 18, Maglite and ARRL, the national association for Amateur Radio®, have announced they have formed a partnership based on the common mission of helping people be prepared for emergencies and to serve their communities in extreme situations such as natural disasters.

ARRL member-volunteers provide public service through the ARRL Amateur Radio Emergency Service® (ARES®), and by expanding the reservoir of trained operators and technicians in radio communications and radio technology. Mag Instrument is the leading maker of U.S.-manufactured high-quality flashlights that have a deserved reputation for performance, reliability and durability.

"Amateur radio operators, or 'hams,' help people in times of difficulty, often by supporting emergency communications when critical infrastructure is damaged, and by responding to the needs of first responders to keep connected," said Anthony Maglica, Founder, Owner and CEO of MAG Instrument Inc. "We manufacture a product that has been used in public safety for over 40 years and we are very supportive of the incredible dedication of radio amateurs, so culturally this is a great alliance for both brands."

MAGLITE® is the preferred flashlight brand of many police, fire and other first responder organizations and is the official flashlight of NASAR - the National Association of Search and Rescue. The partnership with ARRL will entail Mag Instrument creating special laser engraved Maglite® product for ARRL as well as offering their members special pricing on a select line of Maglite products, and in turn, those purchases raise funds for ARRL to support their mission.

"ARRL is delighted that Maglite recognizes the service and skill of ARRL members. This partnership will help us introduce amateur radio to more people," says David Minster, NA2AA, ARRL CEO.

ARRL, headquartered in Newington, Connecticut, counts the majority of active radio amateurs in the US among its ranks. Since ARRL's founding in 1914, its members have advanced the art, science, and enjoyment of amateur radio. For more information about ARRL and World Amateur Radio Day, visit http://www.arrl.org/.

About Mag Instrument:

Mag Instrument, manufacturer of the Maglite® flashlight

For more visit: https://maglite.com/.

MEDIA CONTACT:
Lou Desmond
951-258-6466
lou@dandlpr.com

*LOGO link for media: https://www.Send2Press.com/300dpi/19-1001s2p-maglogo-300dpi.jpg

In celebration of World Amateur Radio Day on April 18, Maglite and ARRL, the national association for Amateur Radio®, have announced they have formed a partnership based on the common mission of helping people be prepared for emergencies and to serve their communities in extreme situations such as natural disasters.

Related link: https://maglite.com/

157 New Industrial Manufacturing Planned Industrial Project Reports – March 2021 Recap

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today the March 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 157 new projects in the Industrial Manufacturing sector.

The following are selected highlights on new Industrial Manufacturing industry construction news.

Industrial Manufacturing - By Project Type

-- Manufacturing/Production Facilities - 141 New Projects

-- Distribution and Industrial Warehouse - 41 New Projects

Industrial Manufacturing - By Project Scope/Activity

-- New Construction - 45 New Projects

-- Expansion - 57 New Projects

-- Renovations/Equipment Upgrades - 68 New Projects

-- Plant Closings - 6 New Projects

Industrial Manufacturing - By Project Location (Top 10 States)

North Carolina - 11

Wisconsin - 9

Texas - 9

New York - 9

Georgia - 8

Ohio - 8

South Carolina - 7

Michigan - 7

Massachusetts - 6

Kentucky - 6

LARGEST PLANNED PROJECT

During the month of March, our research team identified 12 new Industrial Manufacturing facility construction projects with an estimated value of $100 million or more.

The largest project is owned by Intel Corporation, who is planning to invest $20 billion for the construction of two manufacturing facilities at their manufacturing complex in CHANDLER, AZ. The project is in the early design stage. Completion is slated for 2024.

TOP 10 TRACKED INDUSTRIAL MANUFACTURING PROJECTS

GEORGIA:

Battery mfr. is considering investing $5 billion for the construction of a manufacturing facility and currently seeking a site in GEORGIA. Watch SalesLeads for updates.

ALABAMA:

Cardboard packaging mfr. is planning to invest $440 million for the renovation and equipment upgrades of their manufacturing facility in JACKSON, AL. They have recently received approval for the project. Construction will occur in phases, with completion slated for 2024.

TENNESSEE:

Electric car mfr. is planning to invest $362 million for the renovation and equipment upgrades on a 817,000 sf manufacturing facility at 8400 Winchester in MEMPHIS, TN. They have recently received approval for the project.

MICHIGAN:

Steel products mfr. is considering investing $164 million for the construction of a manufacturing facility and currently seeking a site in MICHIGAN or in the Midwest area of the US. Watch SalesLeads for updates.

QUEBEC:

Electric vehicle mfr. is considering investing $148 million for the construction of a battery manufacturing facility and currently seeking a site in QUEBEC. Watch SalesLeads for updates.

OHIO:

Personal care products mfr. is planning to invest $90 million for the renovation and equipment upgrades on a 570,000 sf manufacturing facility in GROVEPORT, OH. They have recently received approval for the project. Completion is slated for Fall 2021.

KENTUCKY:

Aluminum products mfr. is planning to invest $54 million for the renovation and equipment upgrades on a 460,000 sf manufacturing facility at 300 Brown Rd. in FRANKLIN, KY. They have recently received approval for the project. Completion is slated for Summer 2022.

MASSACHUSETTS:

Fluid control equipment mfr. is planning to invest $53 million for the construction of a 139,000 sf manufacturing facility in DEVENS, MA. They are currently seeking approval for the project.

NORTH CAROLINA:

Electric vehicle mfr. is planning to invest $41 million for the construction of a manufacturing facility in CHARLOTTE, NC. Completion is slated for Summer 2022.

WISCONSIN:

Specialty wire products mfr. is planning to invest $37 million for the expansion of their manufacturing facility in KIMBERLY, WI by 70,000 sf. Construction is expected to start in Spring 2021, with completion slated for 2022.

ABOUT SALESLEADS:

Since 1959, SalesLeads, based out of Jacksonville, FL has been providing Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials.

Learn more: https://www.salesleadsinc.com/industry/industrial-manufacturing/

SalesLeads announced today the March 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 157 new projects.

Related link: https://www.salesleadsinc.com/

ViewTech Borescopes Referred Clients Seeking New Video Borescopes for Mining Equipment Maintenance and Orbital Weld Inspections

TRAVERSE CITY, Mich. /ScoopCloud/ -- With thousands of companies utilizing ViewTech VJ-3 video borescopes, it is a common occurrence that inspectors share tips and their tools of the trade with each other. Many of the times these tools are the suppliers and manufacturers who provide a quality product and superior customer service. As two of ViewTech Borescopes newest clients discovered, all visual inspection equipment is not created equal.

While searching for a better borescope and supplier for their applications inspection needs, a company specializing in ultra-high purity, industrial orbital welding projects and an open pit mining operation contacted ViewTech Borescopes, North America's top selling video borescope company, to take their inspection equipment to the next level.

A Canadian diversified natural resources and mining company expressed interest in trialing a VJ-3 3.9mm x 1.5-meter video borescope onsite at one of their open pit mines. With an extensive and diverse fleet of heavy equipment, all requiring regular maintenance, a VJ-3 video borescope would easily prove to be a valuable resource for their toolbox. After a free demo was shipped to their Condition Monitoring Supervisor, the VJ-3 visually inspected cylinders, pistons, turbos, differentials, and hydraulic valving, along with shovel and drill transmission gearings.

With both image and video capturing capability, failure analysis, mechanical diagnoses, and warranty claims were quickly documented with their new ViewTech video borescope.

When the owner of a clean, high purity process piping facilitation company, specializing in orbital welding, was informed about ViewTech Borescopes line of articulating video borescopes, they reached out to trial a no-cost demo VJ-3. With the Dual Camera video borescope featuring both a forward and side-view camera module and insertion tube lengths up to 8 meters, it is highly recommended for welding, piping, and various other applications where two independent cameras can drastically cut down on inspection times. With use of the VJ-3 Dual Camera in the field, there was no hesitation that the ViewTech video borescope was the best investment for their team of orbital welding experts.

VJ-3 Video Borescope

The VJ-3 mechanical articulating video borescope is a NDT instrument used for the RVI of machinery, equipment, and components. The VJ-3 facilitates the visual recording and photo documentation of inspection and components in areas that are otherwise inaccessible or require great effort and expense to access directly. The VJ-3 video borescope consists of two modules integrated into one system: an insertion tube with distally mounted camera/LEDs, and the base unit with a control panel, LCD monitor, power source, and all necessary circuitry.

About ViewTech Borescopes

ViewTech Borescopes, founded as RF System Lab in 2008, is North America's #1 seller of video borescopes. Their first product, the VJ borescope, set a new standard for portability, ergonomics, and ease-of-use, with its industry-first mechanical, joystick-controlled articulation.

For more information on VJ-3 Video Borescope: https://www.viewtech.com

MULTIMEDIA:

*VIDEO (YouTube): https://youtu.be/nMzKWtANhjQ

*PHOTO link for media: https://www.Send2Press.com/300dpi/21-0409s2p-viewtech-300dpi.jpg

Media Contact:

For more information, press only:

Duncan White, Director of Sales and Marketing

231-943-1171

dwhite@viewtech.com

With thousands of companies utilizing ViewTech VJ-3 video borescopes, it is a common occurrence that inspectors share tips and their tools of the trade with each other. Many of the times these tools are the suppliers and manufacturers who provide a quality product and superior customer service.

Related link: https://www.ViewTech.com

SIERA.AI Secures Major New Customers with Industry-Leading Safety Technology on Forklift Trucks

AUSTIN, Texas /ScoopCloud/ -- SIERA.AI a leading innovator of safety solutions for preventing industrial forklift accidents announced today that the Company has secured six (6) significant new contracts in multiple industry verticals. The six new contracts include third-party logistics, retail, food manufacturing, food service, and manufacturing.

New customers selected the SIERA.AI Safety System, S3 to prevent forklift accidents, injuries to workers and damages to the facility and forklift fleet. Customers expressed an interest to reduce facility operating costs, prevent accidents and improve all around safety in their facility. The new customers will also be able to track safety and performance for all assets regardless of location with the SIERA.AI Dashboard.

"These are important wins for SIERA.AI. Their selection proves our industry-leading safety technology produces significant value," said Saurav Agarwal, president and CEO of SIERA.AI. "ProMatDX will be a valuable platform delivering our message of innovative safety solutions that positively impacts the industrial market's bottom line."

SIERA.AI is a sponsor for the upcoming ProMatDX show from April 12-16, 2021. The Company's forklift safety presentation is on Friday, April 16, 2021 from 1:30 - 1:45 CST.

About SIERA.AI

SIERA.AI believes in the Power of One. Our goal is to remove one barrier at a time with innovative solutions that empower and safeguard company assets and protect their employees so they can focus on what they do best. We accomplish this by integrating technologies such as machine vision, IoT sensors and AI to prevent accidents before they even happen. For more information visit https://www.siera.ai/.

Media Contact for SIERA.AI
Cherise Kennerley
cherise@siera.ai
847-312-1367 mobile

SIERA.AI a leading innovator of safety solutions for preventing industrial forklift accidents announced today that the Company has secured six (6) significant new contracts in multiple industry verticals. The six new contracts include third-party logistics, retail, food manufacturing, food service, and manufacturing.

Related link: https://www.siera.ai/

Moduline Cabinets Announces Custom Storage Solutions for Van Upfits

BROCKTON, Mass. /ScoopCloud/ -- Moduline Cabinets, a trusted custom cabinet manufacturer, announced the expansion of its flagship PROII™ cabinet series to serve van upfits. This unique expansion gives customers looking for an in-vehicle storage system even more storage options, in addition to Moduline's Upfit™ Series.

PROII™ cabinets have been a trusted cabinet storage solution for decades. The professional-grade, customizable cabinets are made from durable military-grade aluminum and are specially designed to maximize storage capacity and functionality.

Customers are free to mix-and-match PROII™ cabinet configurations to meet their storage needs, whether it is in the garage, at the shop, or now in their work vehicle. Traditionally, PROII™ cabinets are used in garages, industrial shops, and manufacturing settings. Now, the PROII™ cabinet line is expanding to meet the growing demand for van upfits. As more professionals are working on the go, they need more portable and secure storage solutions for their vehicles.

"We also put PROII™ Series cabinets in vans. Usually, it's just wall cabinets, but sometimes full-blown setups with counters and everything. We've seen people order Upfit™ series and fill in with some PROII™ overheads, so we want customers to see our solutions for vans include both products," said Tristan Riley, Moduline Cabinets engineer.

Now, consumers who need a safe and secure storage system in their van, trailer, box truck and more, can choose from Moduline's PROII™ cabinets as well as Moduline's Upfit™ Series. The Upfit™ Series, launched in 2020, offers more lightweight custom cabinet solutions designed specifically for vehicle upfit projects.

PROII™ cabinets are perfect to offer even more upfit storage options. PROII™ cabinets feature Moduline's patented latch system that keeps drawers and cabinet doors securely shut without needing a lock and key. Customers can also add one of the PROII™ cabinet countertop options to their van upfits to create a workspace even when they are always on the go.

All Moduline cabinets come with a lifetime warranty to guarantee our manufacturing, materials, and workmanship.

You can learn more about the PROII™ cabinet series and its many applications on our website.

Moduline Cabinets designs and manufactures modular aluminum storage cabinets to fit the unique needs of our customers. For three decades, Moduline Cabinets have been used in homes, garages, vehicles, trailers, commercial buildings, industrial shops, and by the military. We pride ourselves on specializing in custom cabinet designs along with unmatched customer service.

To explore the Upfit™ Series packages, visit: https://www.modulinecabinets.com/product/upfit-series/

To explore the PROII™ Series of cabinets, visit: https://www.modulinecabinets.com/pro-ii-series/

About Moduline Cabinets:

Moduline Cabinets is a premier designer and manufacturer of quality, American-made modular aluminum storage cabinets. Moduline cabinets can be found in residential garages, vehicles, trailers, commercial and industrial shops, military and other specialty applications. For over 30 years, Moduline has provided cabinet solutions for car enthusiasts and professionals, specializing in custom designs and unmatched customer service.

Web logo: https://www.modulinecabinets.com/wp-content/themes/modulinecabinets/image/logo.png

VIDEO (Vimeo): https://vimeo.com/454474659

VIDEO (YouTube): https://www.youtube.com/watch?v=V7AbSw2kLb0

Moduline Cabinets, a trusted custom cabinet manufacturer, announced the expansion of its flagship PROII™ cabinet series to serve van upfits. This unique expansion gives customers looking for an in-vehicle storage system even more storage options, in addition to Moduline's Upfit™ Series.

Related link: https://www.modulinecabinets.com/

Addressing Post-COVID Shipping Shock – How One Iowa Manufacturer Proved U.S. Sourced Materials Provide Advantages in Economy and Efficiency

OSCEOLA, Iowa, /ScoopCloud/ -- Miller Products Company in Osceola Iowa, supplier of stock pins and fasteners as well as precision and Swiss CNC machined parts, has seen a significant increase in the demand for quick-turn and custom machining due to the post-COVID shipping challenges.

One year after the COVID-19 pandemic hit supply chains with port shutdowns, the impact continues to ripple from China through India and around the world. Many manufacturers are still struggling to source parts and materials for their U.S.-based operations. Shortages from overseas as well as price hikes and delays are wreaking havoc with U.S. manufacturing workflows and operational budgets.

With clients reporting overseas pricing increasing three-fold and more, the cost to procure stock pieces from these ports is no longer economical. Production houses, like Miller, who source materials predominantly from the United States are seeing a different kind of post-COVID shock. In the past three weeks, Kerry Richardson, Sales and Marketing Manager at Miller, has booked a handful of new orders based on shipping delays and costs alone.

"We had one client tell us their India supplier pushed their orders back more than three months," said Richardson. "That's a supply chain disaster."

According to a January 2021 feature in The Washington Post (*note 1), "The cost of shipping a container of goods has risen by 80 percent since early November {2020} and has nearly tripled over the past year..." These statistics are based on research provided through the Freightos Basic Index (*note 2).

Miller's Midwest location and proximity to interstate, highway, and rail lines gives them a boost in supply chain efficiency other manufacturing companies lack.

"The bulk of our materials are shipped in daily from all over the U.S.," said Richardson. "From steel out of Chicago to aluminum and plastic out of Phoenix and Wisconsin, it's all accessible and delivered within days from a simple call."

With an extensive warehouse, Miller's stock pins and fasteners, used by a variety of manufacturing operations from agriculture to construction, military contractors, and more, can be ordered and shipped within the U.S. as quickly as four weeks. Custom manufactured parts from their precision CNC and Swiss CNC machines can often be turned within a few weeks as well. Compared to three or four month delays from overseas, this makes all the difference for their customers' operational efficiency.

"After more than 80 years in the industry, through ups and downs, including this pandemic, we know how to make sure our products are cost effective and accessible," said Richardson.

If you have questions about the Miller Products line of stock pins and fasteners or would like to discuss custom, precision, or Swiss CNC machined parts, please reach out to Kerry Richardson, Sales and Marketing Manager at Miller Products Company at 1-800-245-7034, or email sales@millerproductsco.com.

Learn more at: https://www.millerproductsco.com/

Notes:

1 - https://www.washingtonpost.com/business/2021/01/24/pandemic-shipping-economy/

2 - https://fbx.freightos.com/

About Miller Products Company:

Established in 1936, Miller Products Company is an Osceola, Iowa-based supplier of quality manufactured products including single spindle/CNC, and multi spindle screw machined parts, stock non-threaded pins and fasteners, including a wide variety of lock pins, hitch pins, bent pins, and tension lock hitch pins that are sold throughout the U.S. and international manufacturing markets.

Miller Products Company in Osceola Iowa, supplier of stock pins and fasteners as well as precision and Swiss CNC machined parts, has seen a significant increase in the demand for quick-turn and custom machining due to the post-COVID shipping challenges.

Related link: https://www.millerproductsco.com/

MicroShield 360 Reflects on Impact to Private Aviation

CLEVELAND, Ohio /ScoopCloud/ -- MicroShield 360, an industry leader in antimicrobial coatings, has announced today that in the last year, more than 600 private aircraft have had the company's highly durable antimicrobial product applied to interior surfaces for added protection. Due to demand for safer air travel amid the on-going pandemic, MicroShield 360 is expanding application and distribution capabilities to meet the demand of the aviation industry.

A key component to the company's strategy was to create a better price point for its loyal customers and lower barrier of entry for new customers.

"2020 was a year marked by unexpected challenges for everyone, including us," said Steve Kubec, Vice President of MicroShield 360. "We knew in 2021 that we would have to challenge ourselves to deliver our products and services to a wider audience with more efficiency. Our strategic approach now includes competitive pricing and expanded product offerings. We understand this all about accessibility and consumer confidence."

MicroShield 360 has created a robust and detailed web-based training program that is available to any company or aviation end-user that wants to have the antimicrobial coating applied to its aircraft to create the safest environment possible. This is coupled with the release of MicroShield 360 Endure, a non-alcohol-based hand sanitizer that is effective for up to 4 hours.

"The product line and service are built on flexibility and the preference of our clients," says Kubec. "Our aviation partners have been amazing over the last year. Without their dedication to their customers and crew members, we would not be in the position we are today to help create the peace of mind everyone wants when they step onto a plane. The confidence to travel safely is paramount to our culture and economy, now more than ever."

MicroShield 360 is approved by Bombardier, Embraer, Dassault and multiple component manufacturers for application to virtually every surface on an airplane, including the cockpit.

"We cannot put into words how appreciative we are of these company's efforts to approve of, and more importantly improve on, what we can bring to the market." Kubec continues with, "We look forward to continuing to establish the aviation industry standard for safe, clean and protected air travel."

The MicroShield 360 antimicrobial coating, disinfectant and hand sanitizer are now available for purchase direct from the company, OEMs, Embraer, and Bombardier, as well as any of its authorized application agents throughout the United States.

About MicroShield 360:

MicroShield 360 is a Cleveland, Ohio based company that specializes in antimicrobial coating services with dealers and applicators located both domestically and internationally. For more information, please visit https://microshield360.com/ or call 800-686-4360.

MicroShield 360, an industry leader in antimicrobial coatings, has announced today that in the last year, more than 600 private aircraft have had the company's highly durable antimicrobial product applied to interior surfaces for added protection.

Related link: https://microshield360.com/

Creative Extruded Products Announces Global Expansion to Mexico – The CaliBaja Manufacturing partnership will shoulder the high demand for specialty moldings within multiple vehicle applications

DAYTON, Ohio /ScoopCloud/ -- Creative Extruded Products is excited to announce a new manufacturing partnership with CaliBaja Manufacturing in Mexicali, Mexico. Initially, the CaliBaja location will produce Creative's GripFlex® line of direct-fit aftermarket moldings, which are uniquely designed and engineered for OEM vehicle-specific applications.

"As the demand increased for these products, we made the strategic decision to support our global customers by expanding our production capacity and distribution," said Bill Mills, Vice President of Sales and Marketing for Creative Extruded Products.

Through this partnership, Creative Extruded gains a unique advantage to foster a growing customer base in Mexico and extend its reach to additional international business opportunities.

"This new partnership gives us additional capacity for future growth in the Dayton and Tipp City, Ohio areas as well as internationally," Mills said. "Fortunately, this partnership does not reduce the need for workers at existing facilities. Instead, we anticipate adding several additional jobs and positions in the future."

About Creative Extruded Products, LLC

A manufacturer of OEM moldings since 1979, Creative Extruded Products has become a leader in auto glass molding systems for both OEM and aftermarket customers.

Creative has grown to be a fully integrated system supplier by offering injection molded products and plastic and EPDM extrusions to meet customer needs.

To learn more about Creative Extruded Products, please visit https://creativeextruded.com/.

About CaliBaja Manufacturing

Located in Mexicali, Mexico, CaliBaja is a contract manufacturer with more than 800 employees and 40 years of comprehensive customer service and outstanding manufacturing capabilities.

CaliBaja Manufacturing's operations span four separate facilities with a combined footprint of over 200,000 square feet on approximately 17 acres of land.

Creative Extruded Products is excited to announce a new manufacturing partnership with CaliBaja Manufacturing in Mexicali, Mexico. Initially, the CaliBaja location will produce Creative's GripFlex® line of direct-fit aftermarket moldings, which are uniquely designed and engineered for OEM vehicle-specific applications.

Related link: https://creativeextruded.com/

150 New Industrial Manufacturing Planned Industrial Project Reports – February 2021 Recap

JACKSONVILLE, Fla. /ScoopCloud/ -- SalesLeads announced today the February 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity; including facility expansions, new plant construction and significant equipment modernization projects. Research confirms 150 new projects in the Industrial Manufacturing sector.

The following are selected highlights on new Industrial Manufacturing industry construction news.

Industrial Manufacturing - By Project Type

- Manufacturing/Production Facilities - 128 New Projects

- Distribution and Industrial Warehouse - 53 New Projects

Industrial Manufacturing - By Project Scope/Activity

- New Construction - 42 New Projects

- Expansion - 55 New Projects

- Renovations/Equipment Upgrades - 62 New Projects

- Plant Closings - 7 New Projects

Industrial Manufacturing - By Project Location (Top 10 States)

Indiana - 11
New York - 11
California - 10
Ohio - 8
Wisconsin - 8
Michigan - 8
South Carolina - 7
Tennessee - 6
Texas - 6
Georgia - 5

Largest Planned Project

During the month of February, our research team identified 12 new Industrial Manufacturing facility construction projects with an estimated value of $100 million or more.

The largest project is owned by Convalt Energy, who is planning to invest $650 million for the construction of a 500,000 sf manufacturing facility at Route 12F in WATERTOWN, NY. They are currently seeking approval for the project. Construction will occur in phases and is expected to start in early 2022.

Top 10 Tracked Industrial Manufacturing Projects

TENNESSEE:

Tire mfr. is planning to invest $361 million for the expansion, renovation, and equipment upgrades of their manufacturing facility at 2950 International Boulevard in CLARKSVILLE, TN. They are currently seeking approval for the project.

NEW YORK:

Fuel cell mfr. is planning to invest $264 million for the construction of a processing facility in ALABAMA, NY. They have recently received approval for the project. Completion is slated for late 2022.

WEST VIRGINIA:

Automotive mfr. is planning to invest $210 million for the renovation and equipment upgrades on their manufacturing facility in BUFFALO, WV. Completion is slated for late 2022.

SOUTH CAROLINA:

Automotive components mfr. is planning to invest $200 million for the expansion of their manufacturing facility in GRAY COURT, SC. Completion is slated for 2023.

VIRGINIA:

Specialty packaging mfr. is planning to invest $145 million for the construction of a 355,000 sf manufacturing facility in MARTINSVILLE, VA. They have recently received approval for the project.

ARKANSAS:

Insulation and roofing products mfr. is planning to invest $100 million for the construction of a 550,000 sf manufacturing facility at 5520 Planters Rd. in FORT SMITH, AR. They will relocate operations from their adjacent plant upon completion in Summer 2023.

MICHIGAN:

Automotive mfr. is planning to invest $93 million for the renovation and equipment upgrades on their manufacturing facility in ROMULUS, MI. They have recently received approval for the project.

OHIO:

Automotive mfr. is planning to invest $75 million for the expansion and equipment upgrades at their manufacturing facility in TOLEDO, OH. They have recently received approval for the project.

LOUISIANA:

Paper products mfr. is planning to invest $52 million for the renovation and equipment upgrades of their manufacturing facility in BOGALUSA, LA. They have recently received approval for the project.

GEORGIA:

Auto parts mfr. is planning to invest $38 million for the construction of a 108,000 sf manufacturing facility at 6656 Lone Oak Road in LONE OAK, GA. They have recently received approval for the project.

Since 1959, SalesLeads, based out of Jacksonville, FL has been providing Industrial Project Reports on companies that are planning significant capital investments in their industrial facilities throughout North America. Our professional research team identifies new construction, expansion, relocation, major renovation, equipment upgrades, and plant closing project opportunities so that our clients can focus sales and marketing resources on the target accounts that have an impending need for their products, services, and indirect materials.

Each month, our team provides hundreds of industrial reports within a variety of industries, including:

* Industrial Manufacturing

* Plastics

* Food and Beverage

* Metals

* Power Generation

* Pulp Paper and Wood

* Oil and Gas

* Mining and Aggregates

* Chemical

* Research and Development

* Distribution and Supply Chain

* Pipelines

* Pharmaceutical

* Misc. Industrial Buildings

* Waste Water Treatment

* Data Centers.

Learn more: https://www.salesleadsinc.com/solutions/industrial-project-reports/

SalesLeads announced today the February 2021 results for the new planned capital project spending report for the Industrial Manufacturing industry. The Firm tracks North American planned industrial capital project activity.

Related link: https://www.salesleadsinc.com/

Fastest Developing Aluminum Business in Russia

MOSCOW, Russia /ScoopCloud/ -- BK-ALPROF LLC has become the fastest-growing aluminum company in Russia. 2003 was the starting point. Then in the town of Belaya Kalitva, a plant was put into operation, focused on casting cylindrical ingots from aluminum alloys.

BK-ALPROF LLC has outpaced its competition in Russia as the most productive business in the aluminum industry. Also, extrusion, machine processing, painting, anodic oxidation, sale of aluminum profiles, and production of translucent structures were started. Our foundry was launched in 2007. The enterprise very quickly gained high production rates, and today BK-ALPROF is not only the pride of its home region but also a worthy player on the domestic market, a trustworthy partner for foreign customers.

Capabilities Allowing for Rapid Growth

20.000 tons of aluminum profiles a year is the productivity figure of BK-ALPROF LLC today. This capacity is provided by modern high-tech equipment made by EU standards, located on an area of more than 18.000 square meters. Production is carried out on three press lines, two of them are made based on hydraulic presses with a force of 12.500 kN each, the third, manufactured by Italian company OMAV, based on an SMS press with a force of 18.000 kN.

For extrusion of aluminum shapes, raw materials from both our production and international public joint-stock company RUSAL are used. These materials meet the requirements of international standards. Having our own foundry guarantees our business complete protection from interruptions in the supply of raw materials for the extrusion of aluminum profiles. BK-ALPROF LLC can independently provide the production with high-quality ingots with the required chemical composition.

The production of profiles of any complexity and configuration from 6XXX series alloys has been established. It uses extrusion tools from leading European manufacturers. The main principles of the enterprise are based on maintaining the quality management system in keeping with the requirements of ISO 9001:2015, certified by international company TÜV NORD CERT. We are constantly improving our manufacturing process and increasing our effectiveness. We have firmly learned that modernization leads to high quality.

Aluminum profiles produced by the company are used in various industries: architecture and construction, manufacturing of LED products, mechanical engineering, trade equipment, various structures, decoration, and decoration. BK-ALPROF produces the finest quality aluminum triangle tubing. The key properties of this tubing include good ductility, resistance to corrosion, heat resistance, and electrical conductivity. That is why structures made of this material are successfully used in the construction of residential buildings and industrial buildings, in shopping centers and entertainment complexes, in the production of furniture and glazing systems.

About BK-ALPROF

BK-Alprof is the combination of responsible attitude, modern technologies, the material of great standards, and an outstanding team of specialists that are always ready to answer all your questions and provide all assistance required. With BK-Alprof, you will keep up with the times and enjoy the safe and enduring items we produce. Learn more: https://bkalprof.ru/.

* Press release picture: https://bkalprof.ru/upload/iblock/DSC08030_m.jpg

Caption: "BK-ALPROF" is a manufacturer of aluminum and aluminum profiles in Russia.

MEDIA ONLY CONTACT:
Helen Miller
+1-718-303-2335
bk-alprof@bk.ru

BK-ALPROF LLC has become the fastest-growing aluminum company in Russia. 2003 was the starting point. Then in the town of Belaya Kalitva, a plant was put into operation, focused on casting cylindrical ingots from aluminum alloys.

Related link: https://bkalprof.ru/

Shipping Now – The Rypos Diesel Particulate Filter for Carrier X4 models 7300 and 7500

FRANKLIN, Mass. /ScoopCloud/ -- RYPOS, Inc., a developer, and manufacturer of advanced exhaust filtration systems that reduce harmful emissions from diesel engines, is pleased to announce the first shipments of their Rypos DPF for Carrier X4 series Transport Refrigeration Units. A fleet located in Central California received the first shipment of filters in January and production is ramping up to meet an increase in early sales.

The X4 is the most cost-effective way to meet CARB's Level 3+ PM reduction standards. The active DPF monitors time and backpressure and automatically initiates regeneration requiring no driver intervention while ensuring that the filter is clean independent of exhaust temperature.

The X4 DPF is a retrofit solution, with a simple replacement of the existing exhaust system. After installation of the X4 DPF, the TRUs are CARB compliant for life.

* The filter is CARB verified for the Carrier X4 7300 and the X4 7500 models

* The filter and controls are the same as the current Carrier filters

* Installation includes the simple replacement of the OEM frame bracket with Rypos DPF mounting bracket

* The DPF assembly has a static (fixed) rain cap filter system designed for installation efficiency

ABOUT RYPOS:

RYPOS is a privately held company with operations in Franklin, MA. They have designed and developed a number of leading-edge diesel exhaust filtration products for small and large engines that utilize their patented electrical regeneration strategy and technology. Learn more at: https://www.rypos.com/

Rypos Contact: Trish Jacobs, 508-429-4552, or email tjacobs@rypos.com.

RYPOS, Inc., 40 Kenwood Circle, Franklin, MA 02038

RYPOS, Inc., a developer, and manufacturer of advanced exhaust filtration systems that reduce harmful emissions from diesel engines, is pleased to announce the first shipments of their Rypos DPF for Carrier X4 series Transport Refrigeration Units. A fleet located in Central California received the first shipment of filters in January and production is ramping up to meet an increase in early sales.

Related link: https://www.rypos.com/

ViewTech Borescopes Acquires New Clients Replacing Outdated Visual Inspection Scopes

TRAVERSE CITY, Mich. /ScoopCloud/ -- Whether an inspection application requires a small diameter borescope to enter a narrow access port or one that can articulate as it navigates through lengthy piping, ViewTech Borescopes VJ-3 video borescopes are utilized and relied upon throughout every industry. North America's lineup of top-selling articulating video borescopes caught the attention of two of their newest clients, a manufacturer of oceanographic measurement equipment and a global energy supplier.

A Production Engineer for an oceanographic equipment manufacturing company sought a new visual inspection tool to assist with product design. It was essential the borescope feature brighter lighting and an improved image quality than their current borescope was equipped with. Through ViewTech Borescopes no-cost, no-obligation demo offer, their Washington based facility was able to trial a VJ-3 2.8mm x 1.0-meter video borescope.

With hands-on experience utilizing the VJ-3, the ViewTech borescope documented areas not visually accessible during previous remote visual inspections (RVI). The decision to purchase was easy to quantify by their engineering team.

Another of ViewTech's newest clients, a global energy supplier, was not able to complete necessary inspections. With their current borescope too large to access chiller tubes, it was critical they purchase an inspection tool specifically for this application. After researching new borescopes for sale, they immediately considered ViewTech's VJ-3 video borescope. The video borescope requirements their Operations & Maintenance Supervisor deemed crucial were: 360-degree articulation, more than 20 feet of insertion tube, and a diameter smaller than half of one inch. The borescope experts at ViewTech recommended they trial a VJ-3 Dual Camera. While many borescopes use side view attachments or interchangeable viewing angle tips, with the ViewTech Dual Camera borescope, simply pushing a button toggles between front-view and side-view cameras. After their free demo VJ-3 Dual Camera was onsite and chiller tube inspections complete, the ViewTech video borescope was purchased by their O&M Supervisor.

VJ-3 Video Borescope

The VJ-3 mechanical articulating video borescope is a NDT instrument used for the RVI of machinery, equipment, and components. The VJ-3 facilitates the visual recording and photo documentation of inspection and components in areas that are otherwise inaccessible or require great effort and expense to access directly. The VJ-3 video borescope consists of two modules integrated into one system: an insertion tube with distally mounted camera/LEDs, and the base unit with a control panel, LCD monitor, power source, and all necessary circuitry.

About ViewTech Borescopes

ViewTech Borescopes, founded as RF System Lab in 2008, is North America's #1 seller of video borescopes. Their first product, the VJ borescope, set a new standard for portability, ergonomics, and ease-of-use, with its industry-first mechanical, joystick-controlled articulation.

For more information on VJ-3 Video Borescope: https://www.viewtech.com/

MULTIMEDIA:

*VIDEO (YouTube): https://youtu.be/nMzKWtANhjQ

Whether an inspection application requires a small diameter borescope to enter a narrow access port or one that can articulate as it navigates through lengthy piping, ViewTech Borescopes VJ-3 video borescopes are utilized and relied upon throughout every industry.

Related link: https://www.ViewTech.com

SIERA.AI Named a Finalist for Best New Product for the 2021 MHI Innovation Awards

AUSTIN, Texas /ScoopCloud/ -- SIERA.AI, a leading innovator for safety solutions, leveraging machine vision, IoT sensors and AI technologies to prevent forklift accidents, was named a finalist in the "Best New Product" category for material handling, logistics and supply chain professionals by MHI. SIERA.AI joins a list of distinguished finalists including SVT Robotics, ThruWave, Vecno Robotics and Wiferion GmbH, chosen from a field of 92 submissions.

"SIERA.AI is honored to be an Innovation Awards finalist," said Saurav Agarwal, President and CEO, SIERA.AI. "We have an incredible, talented team whose passion, endless energy and dedication help create an environment where innovation, creativity and collaboration thrive."

SIERA.AI's new standard for lift truck safety ensures safety in the warehouse, distribution center or manufacturing facility. The S3 Proximity Warning & Impact Monitoring works on any gas, electric or LP lift truck. The system monitors around the lift truck with audible and visual alerts. S3 with Slow to a Safe Stop for electric lift trucks ensures maximum workplace safety.

If a pedestrian, product or vehicle gets within the defined distance, and the operator is unaware, the S3 overrides the driver and automatically slows down and comes to a safe stop. All incidents are reported in our cloud-based dashboard, ready for analysis to ensure OSHA forklift safety standards.

The MHI Innovation Awards educates and provides insights on the latest material handling and supply chain products and services to ProMatDX attendees. ProMatDX is a digital event for manufacturing and supply chain professionals with critical access to the latest solutions to improve resiliency and agility of their operations. SIERA.AI is a sponsor for the event.

About SIERA.AI

SIERA.AI believes in the Power of One. Our goal is to remove one barrier at a time with innovative solutions that empower and safeguard company assets and protect their employees so they can focus on what they do best. We accomplish this by integrating technologies such as machine vision, IoT sensors and AI to prevent accidents before they even happen. For more information visit https://www.siera.ai/.

SIERA.AI, a leading innovator for safety solutions, leveraging machine vision, IoT sensors and AI technologies to prevent forklift accidents, was named a finalist in the "Best New Product" category for material handling, logistics and supply chain professionals by MHI.

Related link: https://www.siera.ai/